The
Shure SM58 is a dynamic microphone instead of the
electret one
Neumann TLM 103. This means that
Shure does not need a phantom power supply voltage, instead of
Neumann TLM 103; this one needs 48Volts. Here are the specifications for each one of the microphones:
Shure SM 58 -
Neumann TLM 103. In case you use a
pre-amplifier or an audio console try to locate a
switch marked as "Phantom Power" and turn it on. Typically there is no problem
supplying a phantom power at the SM58. In case you have no phantom power switch available, either post back the mixer brand / model to check it for you, or post me a question to suggest you one. Details about the usage and the mixer you are already using will help me to clarify the total audio situation.
In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.Thanks and regards
Please kindly rate this solution
Stelios
direct
fixya link: http://www.fixya.com/users/technical114
×