Cant pair my bluetooth

You should search for this topic and answers, First.

Try 0000 that's the default for all bluetooth accessories.

If that doesn't work, here is generic instructions:


Paring a Bluetooth Handset with Android phone:

Instructions:
Now that you have your headset in pairing mode, proceed to pair it with your phone:

From the home screen, press the Menu key and then select Settings.

Tap the "Bluetooth" toggle to ON.

Tap Bluetooth to scan for devices.
NOTE: You will automatically be connected to an available saved device when Bluetooth is turned on.

Tap one to connect.
NOTE: A security code may be required. (Try 0000)

The Bluetooth connected icon will be displayed in the notification bar, and the device will now be labeled as Connected.

Place calls using the Bluetooth headset

Ensure the Bluetooth headset is paired with the handset.
Place the Bluetooth headset over your ear.
Dial the desired the phone number on your phone, and then tap Call.
Receive calls using the Bluetooth headset

Ensure the Bluetooth headset is paired with the handset.
Place the Bluetooth headset over your ear.
Press the Call button on the Bluetooth headset when a call is received.

I might be wrong, but I think the iPod Touch, not being a phone, doesn't have either HSP (HeadSet Profile) or HFP (Hands Free Profile) bluetooth profiles, solely used for phone calls. Nevertheless, being an audio/video reproduction device, it must have A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile), from its 2nd-gen onwards. Your problem is that the Plantronics 925, being a monoaural bluetooth headset, bears HSP and HFP only. You were able to successfully pair it with your TP2 because it is a phone. You must purchase stereo bluetooth headsets, in order to pair them with your iPod Touch.
Just my 2 cents... Carlos

Try the headset that is compatible with you Motorola Q9h GSM phone.

Try the default 0000 or 1111

Stelios.

make sure that your bluetooth headset is charged and it is on while pairing

On the PHONE
Turning on and pairing a Bluetooth device
To turn on and pair a Bluetooth device, perform the following steps:
1. At the Home screen, press the Menu key.
2. Touch Settings.
3. Touch Wireless controls.
4. Touch Bluetooth to select the check-box and turn on Bluetooth.
5. Touch Bluetooth to select the check-box and turn on Bluetooth.
NOTE: The device searches for Bluetooth devices and display a list under Bluetooth devices.
6. Touch the Bluetooth device that you want to connect to.
7. If required, enter the PIN and touch OK. the Pin/passkey: 0000

On Bluetooth headset
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by sliding the Power switch
towards the microphone to initiate easy pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate headset is in pairing mode.
Select OK.

turn the bluetooth on, on the device .. then place the headset in pairing mode, search for the device from the phone then place them a foot apart once it finds the headset name it and it will ask for a code it is normally 0000.. then it will say device is paired and it will work

I took my bluetooth and phone to a Sprint store and the representative was able to pair it for me. Thank you and have a good day.

You have paired your phone to another device. Your phone will not recognize the new device, as it is looking for the old one.

To solve, look for your instructions on how to ADD your headset to an existing connected device.

Or you can hold down the button on your headset until the colors turn red/blue, go to your phone connectivity, search for bluetooth device, once found, then connect and add your password, most likely 0000.

Try that, in that exact sequence. Please rate me!

ManOwar

most bluetooth default passwords are 0000
it should pair up.