I cant seem to change the date and time on my recently purchased Insignia Model NS-DSC1110A. There appears to be no options within the menu mode, only to add date and time to photos taken so I removed the batteries, removed the SD card, lookd for a reset button, nothing seems to work. HELP!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can change this option by going to the "Channels" menu and selecting "Auto Channel Search." Additional details can be foundat InsigniaProducts.com, under the Support tab for your TV.
Remove the battery to force the unit to power off. Reinstall a fresh battery and reset the unit by inserting a thin tool (e.g. an unbent paper clip) into the reset port. A schematic can be found in the owner's manual. If these steps don't resolve the problem, you may return to the place of purchase to pursue service options.
If you have replaced the batteries and the unit will still not power on, it may require service. You may take the camcorder to the store of purchase to request repairs. The camcorder has a limited warranty of one year from the date of purchase, so your repair may be covered if within that period. I hope this helps.
To make it work you have to change it to MSC mode (Only for Windows XP and 2K, it somewhat technical so do it at your own pace and follow instruction:
Click on the Start button and Select Settings. Then click on Control Panel.
Double click System, and then select the Hardware tab.
Click on Device manager.
Click on the '+' for Portable device and you will see "Insignia Video Player".
Right click and select "Update driver".
A Hardware Update Window will open, Select "No, not this time" when windows asks to search for software.Click next.Check the "Install from a list or specific location" checkbox and then click next.
On the next screen select "Don't Search. I will choose the driver to install".
Click next and then you will see a window showing two drivers that are compatible with your player.
To put the device into MSC mode select "USB Mass Storage Device" and click next.
A finish installing driver will appear and your device will now appear as a hard drive on your system.
To switch back to MTP mode, open the device manager as above and click on the "+" for "Universal Serial bus controllers" and you will see "Insignia Video Player".
Then follow the steps above until you reach the "Select the device driver..." screen in which you select "MTP device".
Then click next and your device will be reset back into MTP mode.
You may have missed a step in the procedure try this one. This information was found on the following website http://www.videohelp.com/dvdhacks/insignia-ns-7dpdvd/8394 It is dated as working on 01-08-08. I hope this information help you with your problem. 1.- Power on with no DVD inside the player; 2.- Press open on the DVD player; 3.- Press Menu button on DVD (or SETUP on remote control), (you see General Setup Page on the screen); 4.- Press the right key 3 times to select the Preference Page; 5.- On the remote control press 9653; 6.- Use the up and down key to select the Region, Select 0 for all regions; 7.- Press Enter. (This works with NS-7PDVD and NS-8PDVD)
1) On the remote control type "SETUP" button 2) Select "PREFERENCES" in the menu with 3) Validate it with the button "OK" 4) Enter the code : "224455" 5) With the direction keys type: a) Left key : < (Nothing happens) b) Down key : v (a menu appears on the screen with all region) 6) Select the Region : 0 (all) with the direction keys 7) Validate it with the button "OK" 8) Finish the process by typing the "SETUP" button.
How to unlock a dvd player Insignia NS-H2002-U for region free Insignia NS-H2002-U With disk In the player (must be allowed region on you dvd) Press stop in the remote dvd control 2 times to have a dvd screen in your tv Press 16719 in your remote no matter what appears in the screen, at the end the region menu will appear Using down arrow go to region that you want, “0” is for region free. Press ok and enjoy it. If do not work, power of your dvd, turn on again, incert allowed dvd movie in your insignia dvd player, when start reading disk, press stop and the press setup in your remote control, set uo dvd screen appears, then press 16719 in your remote, region menu will appear and use down arrow to select your region code, zero is for all regions. Enjoy it
×