I lost my codes book
Hey finally I found myself how to set the code... I have a PX-RC1 kind a noname remote at XScargo anyway...
Press SET BUTTON and at the same time, the appliance you want to set( TV, VCR,Aux...etc). The LED shoould stay on.. then press on the SET BUTTON again ... the led will blink fast... then press ( in front of TV, of else).. the POWER BUTTON to see what happens, if nothing happens, then press the +CHANNEL BUTTON once, and press power again. Repeat this until it turn off. THen press the appliance button (VCR,TV,AUX, etc...), this will stop the LED to blink and your appliance will be set.. I guess if it doesn't work good, go further onto the code with the +CHANNEL BUTTON (better count it in case you go too far, for myself I went too far and tried to use the -BUTTON and didn't work)
GOOD LUCK GUYS,
This worked for me I am checking out a Koss dvd system for a friend Thanks for the info
Thanks buddy,it really worked for me.appreciate your help...thanks again...God bless..!!!
Hi! This worked for me! I'm Leyz/leheart from the Philippines. I'm typing in CRKing Universal Remote Control PX-RC1 so that these keywords will show up if someone's looking for it too.
Mcneileric is right!
Real TV should be on! On the remote, press and hold the SET and DEVICE TYPE (in my case TV) at the same time. (Note: SET button is not any other button but the one with the word SET on it. You might have been searching on youtube and found that they are pressing other SET button but do press the SET button with the SET word). Then press SET again. Press the POWER button then + CHANNEL button then POWER button then +CHANNEL button then POWER button then +CHANNEL. (This process is so the remote could look for the code while you are pressing the +CHANNEL and the POWER is to set if the tv will turn off/respond to the remote). Do this repeatedly until the time that when you press the POWER button, the real TV turns off which means the real TV now responds. You will be shocked so DON'T press the +CHANNEL button anymore as this will instruct the device to look for another code. Instead, press the DEVICE TYPE button (TV for my case) to finish the set up.
NOW YOU CAN USE the REMOTE! Press the POWER button and this will turn on the TV!
Again...
TV on
Press and hold SET button (yes, the button with the word SET) and DEVICE type button (TV/VCR,etc) at the same time for about 3 seconds
Press SET again
Press Power to check if the TV turns off
^^If nothing happens, press +CHANNEL to search for code
Press Power again to check if TV turns off^^
If nothing happens, repeat the step between ^^ and ^^
If the TV now turns off after pressing the POWER button, press the DEVICE type button to finish the setup.
Mcneileric, THANK YOU!!!!
Hi! This worked for me! I'm Leyz/leheart from the Philippines. I'm typing in CDRKing or CD-R King or CDR King Universal Remote Control PX-RC1 so that these keywords will show up if someone's looking for it too.
Mcneileric is right!
Real TV should be on! On the remote, press and hold the SET and DEVICE TYPE (in my case TV) at the same time. (Note: SET button is not any other button but the one with the word SET on it. You might have been searching on youtube and found that they are pressing other SET buttons but do press the SET button with the SET word). Then press SET again. Press the POWER button then + CHANNEL button then POWER button then +CHANNEL button then POWER button then +CHANNEL. (This process is so the remote could look for the code while you are pressing the +CHANNEL and the POWER is to see if the tv will turn off/respond to the remote). Do this repeatedly until the time that when you press the POWER button, the real TV turns off which means the real TV now responds. You will be shocked so DON'T press the +CHANNEL button anymore as this will instruct the device to look for another code. Instead, press the DEVICE TYPE button (TV for my case) to finish the set up.
NOW YOU CAN USE the REMOTE! Press the POWER button and this will turn on the TV!
Again...
TV on
Press and hold SET button (yes, the button with the word SET) and DEVICE type button (TV/VCR,etc) at the same time for about 3 seconds
Press SET again
Press Power to check if the TV turns off
^^If nothing happens, press +CHANNEL to search for code
Press Power again to check if TV turns off^^
If nothing happens, repeat the step between ^^ and ^^
If the TV now turns off after pressing the POWER button, press the DEVICE type button to finish the setup.
Mcneileric, THANK YOU!!!!
worked great thanks for the info..
Worked great for me as well. Thank you mcneileric.
My remote works now. Thank you very much!
×
Listen to what mc neileric said to do if you do not have codes,,,,,,,just wanted to add that it might take some time to get appliance to work.....it took me over 20 minutes of +channel up then power button one channel at a time but finally solved remote issue.....thanks
I lost code book
I HAVE A PX-RC1 REMOTE AND I CAN NOT GET IT TO WORK WITH A MEMOREX MT 1136 DOES ANY ONE HAVE ANY IDEA HOW IT WILL WORK......MY EMAIL IS [email protected]
Hi! This worked for me! I'm Leyz/leheart from the Philippines. I'm typing in CDRKing or CD-R King or CDR King Universal Remote Control PX-RC1 so that these keywords will show up if someone's looking for it too.
Mcneileric is right!
Real TV should be on! On the remote, press and hold the SET and DEVICE TYPE (in my case TV) at the same time. (Note: SET button is not any other button but the one with the word SET on it. You might have been searching on youtube and found that they are pressing other SET buttons but do press the SET button with the SET word). Then press SET again. Press the POWER button then + CHANNEL button then POWER button then +CHANNEL button then POWER button then +CHANNEL. (This process is so the remote could look for the code while you are pressing the +CHANNEL and the POWER is to see if the tv will turn off/respond to the remote). Do this repeatedly until the time that when you press the POWER button, the real TV turns off which means the real TV now responds. You will be shocked so DON'T press the +CHANNEL button anymore as this will instruct the device to look for another code. Instead, press the DEVICE TYPE button (TV for my case) to finish the set up.
NOW YOU CAN USE the REMOTE! Press the POWER button and this will turn on the TV!
Again...
TV on
Press and hold SET button (yes, the button with the word SET) and DEVICE type button (TV/VCR,etc) at the same time for about 3 seconds
Press SET again
Press Power to check if the TV turns off
^^If nothing happens, press +CHANNEL to search for code
Press Power again to check if TV turns off^^
If nothing happens, repeat the step between ^^ and ^^
If the TV now turns off after pressing the POWER button, press the DEVICE type button to finish the setup.
Mcneileric, THANK YOU!!!!
SOURCE: px-rc1 remote lost code book
I used the code 0030 to program a PX-RC1 remote for my Apex tv/dvd combo.
SOURCE: universal remote
The MX-500 has a learning mode that you can use. Press MAIN and ENT together for 3 seconds, then press the P-PRO button. Select the device then button you wish to program on your remote and then with both remotes facing each other (IR ports must be able to communicate) press the button on your other remote.
You can also download a copy of the book here...
http://www.universalremote.com/resources/pdfs/MX500manual.pdf
15,081 views
Usually answered in minutes!
px-rc1
need codes
code for sony?????????
GBKMB.
I need the code for a JVC tv.
i lost my codes book
I have a Samsung Dyna Flat. I have a remote PX-RC1. I have lost the code book. Now plz tell me what is the code and how to set it?
how to program px-rc1 to an electrohome dvd? the tv part works, but the dvd, attached to tv doesn't
JUujst looking for codees & instructions for my PX-RC1
just want to set up remote px-rc1
lost my code book
the px-rc1 in't working
i need the codes for the electrohome dvd for my PX RC1. I also bought mine at XS Cargo. Thanks for any help!
According to the instruction of the booklet of PX-RC1, I did everything but it didn,t work at all for my VCR.
×