Have a 50 inch tv with too much red and double picture the red is the double picture

Good Luck.

check the connections. if the ribbon cables are seated correctly, this will cause picture issues.

bad lamp

You have a convergence problem.
Maybe need change the IC of convergence, or the power supply of these parts.

Bye.

19 in wont turn on. red light just solid , unplugged for a day still same , is there a reset button

I have the sames t.v you have to go in the back flip the power cord switch...then reboot the t.v.

You need to contact an ISF certified calibrationist.

Problem solved. I tried playing DVD and the TV picture was fine. So I double-checked cable wires from cable box - one of the wires was loose (obviously it was the red color input). After tightening, the TV picture is good as new.

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

convergence amp ic bad

sounds like your crt tubes...meaning Red, Green and Blue are out of alignment...or possibly 1 of the crt's is burned out.