Canon ImageCLASS MF5770 All-In-One Printer: I have 64-bit Windows 7 and need the drivers for it.

Hello,

Unfortunetaly, there is no solution for your problem, Canon did not made drivers for 64-bit OS's.

Alterantively

You can try download Windows XP mod for WIndows 7 or any other virtualization software, and try to install drivers on the virtual PC.
This should work for you.

You can check the Canon website but the best I can tell is that there is only a 32-bit driver available for Windows Vista and Windows 7.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d680#DriversAndSoftware

From information available it does not look like there are plans to provide a 64-bit driver.

Suggest you send an inquiry direct to Canon:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d680/form_display/support_by_email

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay pmbixg

Drivers can be found at these sites:


imageCLASS MF5770

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf5770#BrochuresAndManuals


MF6500 Series UFR II Printer Driver Ver.2.00 for Windows Vista x64

http://canoncanada.custhelp.com/app/answers/detail/a_id/8350/~/mf6500-series-ufr-ii-printer-driver-ver.2.00-for-windows-vista-x64

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay npyv

Here is the link for your printer:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=239&modelid=8152#DownloadDetailAct

Choose your OS, where it lists the driver click on that link and then agree to the terms. It has drivers for windows 7 and drivers for vista. If the windows 7 driver doesn't work then choose the vista driver. If neither work then your printer is outdated for the OS that your running.

Try follow my instructions here --

http://andrewtheart.blogspot.com/2010/06/installing-canon-mf3240-on-windows-7-64.html

There is solutions to getting the Canon MF 3111 to work with Windows 7 64bit on this site here: http://www.dragonblogger.com/canon-mf3110-printing-with-windows-7-64-bit/ check the article and comments for help.

I don't think Vista is supported for this printer and if not doubt that it will be as Microsoft are bringing out a new OS to replace it.