I have a new Rank Arena lcd tv (53cm) but have lost the manual. I don't know how to tune it. It's self tuning but I don't know what button to press (or hold down) to get it going.

https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.ebay.com.au/itm/REPLACEMENT-RANK-ARENA-REMOTE-CONTROL-RANK-ARENA-TL3291-LCD-TV-/181911775524&ved=0ahUKEwj5zfPf4LnTAhUY7GMKHW1VDGsQFggaMAA&usg=AFQjCNHvMij3FDFRkD_dAzbBMNcYsAim3Q&sig2=kFBhFysvuV3bT5CA6WkwgA

You enter 1234, 1111, 1147 OR 5963 , or press ZOOM button and VOL- KEY both...

you can program the channel manually, just press the menu button in the tv panel. select preset and then manual fine tuning to tuned every channel you want to watch and then save it.to make a manual fine tuning, press manual then select channel you want to tuned and then press vol. up/down button to search right frequency channel.do this process in every channel you want to tuned. hope this can help.

Check this link to download the manual to your device.

1. Press and hold down the [White Arrow Up] 'shift' button.
2. While held down press the UHF tuning button (symbol for button is ->).
3. Press + or - to tune up or down the UHF band as required, until the required station is reached.
4. Select a spare Channel Position.
5. Press [Arrow Up] & [UHF Tuning ->] buttons again to store and exit tuning.
You must use the remote control. No tuning is available on TV.

Here's the procedure:

1. Press MENU.
2. Press LEFT ARROW to highlight Channel Menu.
3. Press DOWN ARROW to highlight Cable. Press CENTER BUTTON to select.
4. Press DOWN or UP ARROW to highlight On or Off according to how you connected your TV. Press CENTER BUTTON to select.
5. Press DOWN ARROW to highlight Auto Program. Press CENTER BUTTON to search for channels.
6. After Auto Program finishes, press MENU to exit.

Rank:
0121 0222 0229 0235 0261
LG:
0404 0419 0383 0414 0296

Try the auto code search. Switch on the device > Select the device key to program > Hold the green "Set" button for 3 seconds > Press "OK" at "Setup" > press "OK" at "Code Se[t]" > Press the down arrow to highlight "Auto" > Press "OK" > Aim at the device > Hold the down arrow for 2 seconds > Press the "OK" button when the device powers off.

All Freeview channels need re-tuned after 30th September.
To re-tune your Sony TV...

1.Press Menu button then go to settings...

2.Scroll down the menu icons until you get to 'Digital Set-up'

3.Press enter/centre key next to direction arrows

4. Select spanner icon and digital audio tuning.

5. You will then be asked if you want to start digital audio tuning.

6. Press enter/centre button....and thats it!.... TV will automatically re-tune.

Select the channel to tune & press "CH" this is the key to the right of zero on the CLE-942 remote, Now you can tune the selected channel. You also need this key to sort/move channels after running auto tune.

Download a User Manual or Quick-Start Guide free from www.skymediauk.co.uk/datasheets/manuals.php