Need Symbol SDK for Symbol Series 3000 like ldt 3805 handheld terminal

I would guess not as it sounds like an older device but you could contact Motorola Solutions to be sure Get Support .

Mark
Motorola Mobility Support

there are a SDK you can try it, confirm that the you had installed the drive.

Not familiar with the MC9002, but here is possibly a place that can help you on it:

https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=Symbol+MC9002+handheld&rh=i%3Aaps%2Ck%3ASymbol+MC9002+handheld

This file can be downloaded from the Symbol support site as part of the Series 3000 Software Development Kit.

Hello,

The PDT6840 has 3 files loaded into it at any one time LWP.HEX, UDP.HEX and an application. SLOADI comes up on the screen during boot. You may require reloading of the software to enable this function again.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

The PDT6846 is the wireless version of the PDT6800 Series terminals. There is a manual that covers the whole series and this link will take you to it: http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=3264502apdf&sliceId=&dialogID=114442201&stateId=1%200%20114440090

According to the protocol documentation in the SDK the Symbol CS1504 cannot guarantee correct datetime when battery voltage gets low.
-- Free Symbol CS1504 software (open source) at www.barcodedevice.net

Hello,
Under Windows CE 4.x series:
Look under here:
Motorola EMDK for .NET\v2.0\SDK\Smart Devices\wce400\armv4
for symbol.all.arm.cab to copy to the PDA to install.

For Windows Mobile 5.x series:
Look under here:
Motorola EMDK for .NET\v2.0\SDK\Smart Devices\wce500\armv4i
for symbol.all.arm.cab to copy to the PDA to install.

Hopefully you won't get the error again. I personally just reference the dll under:
Motorola EMDK for .NET\v2.0\SDK\Smart Devices
and have each symbol reference in my smart device deployment set to "local copy = true". Good day.

I Repair the Symbol handhelds. If you wand I can put new screens on them.