I have a Thermador wall mounted Microwave Model 16-11-157 that needs a new magnetron. Problem---Thermador says this model does not exist. I even gave them their serial number! Can you help? Thanks, Allan

SOURCE: Through the wall vs. window installation

I just purchased an alleged "window mount" air conditioner with the closest dimensions to the existing model. Do these mount as through the wall as well? My current opening = 18 x 26" the new purchase is 16 27/32 x 26.

There are 2 different types of window air conditioners – there are the window type of which will fit in a window that opens top to bottom and there is the slide in model of which the actual air conditioner will slide into a metal sleeve which is very common in apartments. In either case you need to measure the inside of the metal sleeve and then give that to the air conditioner dealer and he will know what to do and there is also a POS (point of sale) @ the store of which will also assist you in the measurement of the A/C unit – the window unit you need to measure the opening of the window itself, I hope this was helpful

SOURCE: i need a replacement magnetron for my thermador cmt21 oven.

I think I have the part. It was replaced in our oven about 2 years ago. We are getting a new oven. The body of the oven is in our driveway. Someone already came and took the doors, lower elements and molding. You are welcome to the magnetron - if that is what is there.
email me at [email protected]

SOURCE: Burn hole in magnetron cap

no it can't, there is a reason why this has happened

SOURCE: Oven does not heat. Thermador Model

Hi,
The thermostat, which registers the amount of heat needed to heat your oven to a specific temperature, may be broken. This can be for either a gas or electric stove. If this unit is not working correctly, your oven will not heat up. If you are trained in oven repair, follow the schematics that came with the appliance; if not, you should call a repairman for the job.
Another reason for the oven not to be heating is that the elements are not working because they have burnt out or are cracked. You can check for this type of damage with a flashlight. Burned-out spots or cracks may not be easy to see, so you may need to unplug the element from its docking area in the oven to inspect it. Again only do this if the power is off at the circuit breaker.