Just purchased a Toshiba 32BV700B flat screen television and need a code to set up the sky plus HD remote so that the volume control works

Hi,

Sky don't list a specific code for the 26A3000R, but there are some generic codes for Toshiba TVs with a Rev 4 remote:

0536, 0581, 0063, 0473, 0530, 0746, 0121, 0742, 0173

Try each of the above codes until you find one that works the power and volume functions. If you have no success or you need code entry instructions, please post back and I will try to assist you further.

Regards,
BElectric

I've found two codes that work fine on a revision 8 Sky remote control and a revision 8r remote:

0056 (LG/Goldstar)
981 (General reset)

Both codes enable volume, channel selection and power on/off.

Hi

Sky v8 remote code is 1065

Cheers
Steve

I have just purchased a LG 42LH2000 Tv but can't seem to get my Sky Plus control to work the volume does anyone have a code to help

please follow the steps below:

TV
RED + SELECT
TV
0056

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

please follow the steps below:

TV
RED + SELECT (flashes twice)
TV
0060

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

Try this
please follow the steps below:

TV
RED + SELECT (flashes twice)
TV
0117

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

You will need a code in order for the tv functions of you sky remote e.g volume to work.

Click here to find out what remote control version you have.

If you have a remote control was produced after 2002 or there is no sticker

click here to use Sky's code look up tool.

Most SKY+HD Remotes are produced after 2002

please follow the steps below:

TV
RED + SELECT (flashes twice)
TV
0156

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

Easy peezy...just press TV on your sky remote,now hold select and the red button until it blinks twice,after it blinks twice enter this code ...1430....it sjould blink twice again,now press standby,it should turn your tv of,if it does press select to save these settings,it should now control your volume too,let me know if this helps