Dcr dvd 306e camcorder where can i buy flat flexi cables

Replacing the flex cable on a camcorder can be a delicate and complex process, as it requires disassembling the device and accessing its internal components. Here are some general steps that you can follow:

1. Turn off the camcorder and remove the battery.
2. Locate the screws or clips that hold the casing of the camcorder in place. Depending on the model, these may be on the bottom, sides, or back of the device.
3. Carefully remove the casing and set it aside.
4. Locate the flex cable that connects the LCD screen to the circuit board. It may be taped or clipped in place.
5. Gently disconnect the flex cable from the circuit board and LCD screen. Take note of how it is connected so that you can reattach the new flex cable correctly.
6. Install the new flex cable in the same position and orientation as the old one.
7. Reconnect the flex cable to the circuit board and LCD screen.
8. Replace the casing of the camcorder and secure it with screws or clips.
9. Reinsert the battery and turn on the camcorder to test the LCD screen.

It's important to note that the specific steps and tools required for this process can vary depending on the make and model of your camcorder. Additionally, if you're not familiar with electronics repair, it's generally recommended to have a professional technician perform the repair to avoid damaging the device or injuring yourself.

Here you go,
2pcs FP 835 LCD Flex Cable For SONY DCR HC20E DCR HC30E DCR HC40E Video...

The back light does not switch on maybe the backlight flexy is broken

Can be the Drum/Video head that is faulty or the flexy cable between the lcd and the main pcb

Flexy cable is faulty replace it,the cable is between lcd and main pcb

The flexy cable between lcd and main pcb is faulty replace it

The flexy cable between lcd and main pcb is faulty

I recently had the same problem. All I did was buy a Head Cleaner, followed the instructions, and now my camera works fine. It only cost me A$12 and I bought it from a shop specialising in digital video cameras. I hope this helps.

After researching various flexible cable numbers from different posts, I found that the SR-200 uses a unique cable, FP-610, part number 187145711. This has been discontinued and replace with part number 187145721 (same cable also used in DCR-SR300).

If you are in doubt with your camera, just take it apart up to the point of seeing the ribbon cable. The part number is printed on the side.

I found two sources for this so far, www.nexttronics.com and https://servicesplus.us.sony.biz/sony-parts.aspx. Price ranged from $30 to $40 plus shipping.