Hotpoint WF645 Front Load Washer Logo

Related Topics:

Anonymous Posted on May 31, 2008

F-08 Won't spin off displays f-08 Also doesn't disolve the tablets [they are still on the clothes] is this because we are using fast wash and the tablets aren't getting enough time to break down properly ?

1 Answer

workman1

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Jun 06, 2008
workman1
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jun 05, 2008
Answers
1
Questions
0
Helped
290
Points
1

F-08 is the code for ' Heater relay not activated ' ( The heater is coming on) The things to check are the Pressure switch or heater and module connections.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hotpoint WF250 clothes coming out soaking wet after spin?

The fast wash cycle is for a reduced capacity load of approximately 3kg , it does not pump or spin long enough for a full capacity load
tip

Washing Machines will not rinse or spin

If the water won't drain out of your washing machine, either something is stuck in the drain hose or pump, or the pump is broken. Both fixes are simple if you're even just a little bit handy with tools. We're showing the repair on a Maytag washing machine.
What is wrong with a washer that does not spin?
If your washer fills with water but doesn't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drivewashing machines do not have belts.) To diagnose the problem, do the following: 1Check the washing machine's spin cycle.
How to Drain Washing Machine That Won Drain Family Handyman
Washer Doesnt Agitate or Spin
Error codes in front load washers
Washing Machine Not Rinsing How To Fix
My washing machine stops at Rinse Does not DRAIN or SPIN
What causes a washing machine not to drain and spin?
If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing.
SOLVED Why won my washer spin or drain Kenmore 110 Series Washing Machine
Maytag Washing Machines will not rinse or spin Google Search
on Dec 12, 2017 • Washing Machines
0helpful
1answer

Washer doesn't spin and drain

Possible blockage in 1 of the outlet pipes causing it to not drain out fast enough and keeping the clothes wet.
0helpful
1answer

Washer doesn't spin out sometimes

you say it drain, but sometimes it won't spin,this could be your filter if it is blocked these new machines can sence it and won't let the machine spin easyest thing check your filter,you never know might be that simple
0helpful
1answer

My front load washer won't spin fast anymore, any solutions out there?

A leading cause of clothing coming out very wet(not spinning on high speed) is over sudding (too much detergent being used) to see if that is the case start the washer without clothes and see if there is build up of suds (there should be NONE) to clean over sudding run a cold water wash and add a cup of white vinagar that will clean the build up of suds
0helpful
1answer

Commercial speed queen won't speen fast enough clothes are still dripping wet I think its too sensitive is there an adjustment for that?

Try putting on a new drive belt. It may be that the belts are slipping and it won't spin fast enough.
0helpful
1answer

I have a L G and it does not spin dry the wash load How can this be fixed

Do you mean it doesn't spin at all...or it doesn't spin fast enough to dry the clothes?

If it will not spin at all you may have a loose belt or broken belt.
If it does not spin fast enough, you may have a loose belt or too latge a load.
1helpful
1answer

I have a kenmore 80 series and its not spinning out the water.

does it drain out the water and spin but the clothes are still wet or is it not draining or spinning?set the timer to spin,open the lid and stick a screw driver into the lid switch hole and see if it spins and drains,also if it doesn't push down and let the switch up,or close the lid down and open it a little do this a few times,you should hear the switch make a clicking sound,if it doesn't click you have a bad lid switch.if the machine is draining and spinning but the clothes are wet,do the same thing with the lid switch and watch it spin with the lid open,is it spinning fast,if not you have a bad transmission and it's not spinning fast enough to remove the water out of the clothes or you could have a kink in the drain hose or something in the pump and it's not draining all the way.let me know what you find and send the model number off of the washer,the number should start with like 110.
1helpful
1answer

Goes through washing cycle but doesn't dissolve the tablets or cleans the clothes.

Clean out your outlet filter; this is to be done regularly once a month, depending on your usage. Re your tablets not disolving, try using front loading washing powder. Also refer to your manual..........
Not finding what you are looking for?

300 views

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...