Could you please tell me if my LC-32GA5E tv can work with sky HD.The manual tells about switching to hd mode,but there seems to be no where to connect hd to the set.The tv is about 5 years old. thanks Richard

You don't .....Sorry it's impossible

0246 0263 0377 0037 0064 0065 0310 0300 0383
0391 0402 0547 0292 0239 0312 0609 0322 0339
0515 0236 0389 0191 0245 0584

Use M6 x 12 mm socket pin screws

Contact sharp customer care and ask them to put you trough sharp parts.

There is nothing wrong with you Sony Bravia TV and it suppport all HD and SD formats.

Are you viewing the HD version of the channel when it is showing a standard defination show. e.g SKY1 HD instead of SKY1.

This means that regular standard defination shows are in a 4:3 ratio and does not fill the whole screen. In order to view these type of shows you will need to tune to regular channel instead of the HD version.

You can check if a show is brocast in HD by going into the tv guide and checking for the HD symbol in the programme symposis.

Example

Strictly speaking to be HD Ready a TV must fullfill 2 things:

1. Have a Screen Resolution of at least 1024 x 768.
2. Have at least 1 HDMI Socket.

Your TV has neither of these, so it is NOT HD Ready, however, it will still be more than capable of showing SKY HD, and it will still look very nice indeed.

I would need a list of the connections on the rear of the TV to tell you which cable to buy, but:

If it has DVI, then a simple HDMI to DVI cable will do for the video.

If it has component, i.e Yb, Yr etc then you will need a more expensive HDMI - Component Video cable.

But otherwise, yes, SKY HD will work fine.

I hope this helps.

I have the same problem. Did you find a solution?

Depending on the brand of laptop, there should be a hotkey (Key combination) that you press to activate a presentation mode.
On my Dell it's Fn (Function) + F8.

Also, you have to have your TV set to the Video or AUX mode that the s-video cable is hooked up to. (Like AUX1/Aux2, or Video1/Video 2) Your best bet is to cycle through them slowly once you activate the presentation mode on your computer, or identify it by the markings near it on the back of the TV.

Sometimes I have to hit the hotkey a few times until my computer and TV 'like' each other.

If this doesn't help, comment on the solution post and we can try more ideas. :)

Hope this helps!

TV maker is Palladium codes are 0560, 398, 391, 446

An HD TV connects in the same way as a standard TV.

Connect a scart lead from the TV scart of the Sky box to the TV.

When you switch on the Sky box it should automatically switch the TV to the correct external input.