Error code PF

Must be something wrong with the cord itself PF means power failure:

Codes and manual

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Codefor Appliances
heatman101

Power Failure maytag whirlpool same same:

http://www.advantagesupplyfl.com/WhirlpoolDryerFaultCodes.html

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Codefor Appliances
heatman101

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances

heatman101

;ll;

Hi


Error code PF means power failure. This happens when there is a power surge or the washer is unplugged manually. To reset this error you'll need to turn off the washer and unplug it for 10 minutes. Restart the washer and check, If the error still appears then pressing the Spin Speed key will begin the Board Output Test. This test turns ‘ON’ a specified output after a key press. Pressing the Spin Speed key again cancels the test. Please post back for further assistance if required.

Daniel

It could mean flood error.if it has stopped full of water & it wont drain out.The pump might be blocked or jammed with hair pin or other debris.

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances

heatman101

,./';

PF is a 'Power Failure' code meaning the dryer power may be interrupted. The plug receptacle may be bad. Check the plug for proper tension. If feels loose, have the receptacle replaced. Inspect the plug for discoloration. (a sign of a bad receptacle). If all looks OK, Check the power connections at the dryer. If looks OK the electronic control may be defective.

THIS is a "Power Failure " Clease the code (press Cancel button) and see if it starts up