How do i turn up the volume on the h500 - Motorola Mobility H500 Wireless Headset

This is normal, the db is in negative.

You can adjust the volume on both your phone and on the headset itself. The H500 has volume buttons on both sides of the device, one on the "top" and one on the "bottom" of the piece. I am including a manual here for you so you can see it, with a picture and diagram as to where the volume adjustment is.

This is the manual:

http://www.motorola.com/mdirect/manuals/QG-H500_9494A56O.pdf

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

try this website:
http://www.motorola.com/mdirect/manuals/QG-H500_9494A56O.pdf

On the H500 - press both volume buttons at the same time and hold until you hear two descending tones to ensure mute is disabled. Also double click the volume control on your computer to open the volume controls and make sure the microphone channel isn't muted.

h500 only has 3 buttons the one on the face is power on/off/answer/hangup
and the two on each side are volume up/down that is all this headset will do

Is it in mute mode?
http://www.motorola.com/mdirect/demos/how2_h500/h500.html

You can't program numbers vocally to you headset, you can only program vocally to your phone only if your phone has the voice dialing option. I have a H500 and can inform you of what I know. To turn on, hold button until blue light flashes once or twice, to turn off is the same thing. To pair your headset with your phone you have to hold down the call button until the light stays on then you use your phone to pair. After pairing the headset will flash quickly then discontinue. If you are using your headset and receive another call, you press the call button on the phone to answer the other line and to also release the call. The volume up and down buttons are found on the top and bottom of the headset, up and down is dependant on which ear you wear your headset. To mute, hold both the volume up and down buttons at the same time, this also unmutes the call. Hope this helps!

If you turned it on and it was steady blue most likely you held the call button too long. The steady blue means it's ready to pair with a phone. Try repairing again and if you still don't hear anything, play with the volume buttons to the top and buttom of the headset the volume may be down. If that doesn't help I don't know what will.

hit the sound icon on your desktop rightclick it, go to Recoringtools turn down the microphone! As in the picture.
Im sorry its dutch :-)

Turn down the volume on the PHONE, not the headset. Motorola 325i w/ H500. Again, turn down the volume on the PHONE, not the headset. In my case almost all the way down.