I lost the codes to my RCA/RCR312w remote and cant remember how to program it to my philips tv i need step by step instructions

Manual -
http://www.rcaaudiovideo.com/docs/common/RCR312W/RCR312W_OM.pdf

Code List -
http://www.rcaaudiovideo.com/docs/common/RCR312W/RCR312W_OTHER_CL.pdf

Hello
The remote codes for Symphonic TV with RCA RCR312W are
10180 & 10171
OK.

Goto this site
http://66.77.167.109/rcaaccessories/RcaaccessoriesController.do?ACTION_TYPE_ID=ACTION_TYPE_CATEGORY&ACTION_CATEGORY_ID=STR_CATEGORY_REMOTE_FINDER
Select your remote under ´SKU´ and ´Product Type´ like TV or DVD, and click for ´Search´.

Note
Instructions for how to program the remote control
http://www.wikihow.com/Program-an-RCA-RCR312W-Remote

you need to supply the SONY TV model just do a google of any URC booklet and then look uo the ctrl codes for your TV it has little to do with the brand of the remote

please rate our help to keep service online

I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
try repeating all the steps again
if this doesnt help try replacing the batteries and then repat all the steps

http://www.wikihow.com/Program-an-RCA-RCR312W-Remote go to this web site follow the directions

You have to hold the component button (TV) and enter the code from http://www.rca.com/codefinder. The SKU it asks for, on my RCR312W, was under the lid from the batteries. Hope it helps.

Someone had posted a solution to manually program the remote. The information came from RCA website. It worked fine. I still would like the code numbers for my remote. I have a LG TV that is about a year old.

RCA Universal Remote Programming Codes
RCA Universal Remote Programming Unknown Code

I can help. I too have an RCR312W remote and it did not work.
I found this code on bobvila.com message board. The code from the RCR311W remote works.


1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!