Network card replacement for conon copier Image runner 5000, and error code "E-602-100" trouble shooting

this error is related with the hard drive, maybe is damaged,

MY CANON IR 2420 WITH ERROR 000007-0000 HOW CAN ISOLVE THIS PROBLEM

this is a stapler issue in the fininisher, it is either off track or something is stopping it from moving or there could simply be staples jammed up

e-000013, it is all about waste toner.
possibility :
- waste toner case was detecred full.
- The PLL lock is released because waste toner motor is locked up, etc.
- The micro switch employed to detect clogging of waste toner is activated.
the position behind-below of copier.
open the beck cover and you ll see it.


the waste toner case

it is all about main motor or drum unit.

Did your service person replace the sub thermister? Also, are you having power problem where the copier is pluged in to?

hi;
you mean E00315-000d-00
this error code appears when there is a codec error the solution is :
1) replace the SDRAM
or
2) replace the HDD
or
3) replace the main controoler board

The memory elements on the PCB are not connected, have poor contact, or
are faulty.
Description
0001 An error has occurred in the course of a read/write check of the
memory on the IP memory PCB.
0002 An error has occurred in the course of a read/write check of the
memory on the ED board.

Try to reconnect all conectors on dc controller pcb.

put in toner then and close cover

Please check the main thermistor TH1 has poor contact or open circuit.,the thermal switch is opened.In this case the fixing heater has opened and the SSR is faulty.
For the reset : COPIER-FUNCTION-CLEAR-ERR.