Edirol ua25 jack speaker output

you should try it according to sound system.

try using it from anoter computer or take it back to where you bought it for further assistance

Possibly, your adapter of small to big is not a stereo adapter. Seems like a mono adapter.

This interface works fine with other hosts but with cubase is more tricky. But you can fix it.

You need to disable the onboard sound card, also use the UA25 Asio drivers, go to programs/Steinberg cubase/ ASIO multimedia setup and you should see the UA25 outports are active and that the sync ref "YES" also that the UA25 Input ports are active. the next bit is a bit of fun select the Advanced options and select Detect buffer size, when thats finished select Check Buffers and Sync, press the start button and the test will run,if everything is ok you should have zero "Sync lost" and zero "Buffer lost"
Depending on how lower you want to get your latency , you may have to tweek the UA25 driver settings and re-run the setup above.

You'd need amplified speakers, like used for ipods and such, as the output on the headphone jack is a lower volume.

The behaviour is actually normal, I checked in the manual ....

Hey, if you're in the UK you can ring tech support on 0208 747 5949 - they're really good.
Have you got the advance switch set to ON on the back of the device?
LC (UK)

Hello..if you can try to connect a external speaker or phones..if the volume is ok..than i think it is time to replace your internal speaker..pse tll me....good luck...Ron

What version of windows our you running, you might have to go to control panel and make sure it is the default audio out

some driver has been installed by your device...to go back, do you have "system Restore" turned on? if so, try restoring XP to a time before your device