My Kodak Z659 flash does not fire on any setting. From the posts, i need a flash circut and if possible a repair manual or someone to repair it. Tom
On my Z650, the microswitch that turns the flash circuit on when opening the flash broke when I dropped it. I fixed it by gluing another microswitch on the side on the flash housing and wiring it to where the broken switch was.
Not sure where you can get another microswitch from - try scrounging one from an old VCR or another broken camera. Better still from a Z650 then you can just replace the broken one on the circuit board rather than making an alternative arrangement like I had to.
Thanks,
Dave Boltman
Hi all,
Contact Ray @ [email protected]
Mention your problem and he will help you. He is very good.
Have a good day!
Hi all,
Contact Ray @ [email protected]
Mention your problem and he will help you. He is very good.
Have a good day!
Kodak will not sell the service manual or any replacement parts to non authorized contracted service reps.
Most of the fixes in these cameras is replacement of boards. They do not support component level servicing.
Jerry G.
225 views
Usually answered in minutes!
z650 not 659
×