Washing Machines Logo

Related Topics:

Posted on Nov 01, 2010

Fills with water then does not rotate, also does not spin

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Nov 01, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 01, 2010
Answers
1
Questions
0
Helped
361
Points
3

Check for large items of clothes being tangled if the Bosch washing machine doesn't spin. The weight could not be evenly distributed in the drum and the spin cycle will have been disabled to prevent damage to the clothes..

Load the drum with large and small clothes together and run the entire washing cycle and spin cycle again.

Add more powder and run the entire washing and spin cycle again if you haven't found tangled large items, but the spin cycle still failed. This indicates the amount of cloths was too small.

Add 1 tablespoon of fabric softener to 1 pint of water and pour it into the main detergent dispenser if there's no tangling and the load was a normal size. The cause would have been excessive suds because of too much, or the wrong kind, of detergent. Use HE (High Efficiency) detergent in Bosch washing machines.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

It will fill up with water and drain but won't spin or turn at all.

hello Katie,

Your water level sensor is faulted, or it could be the water level selector switch. Next time it happens, try rotating the water level selector between load sizes. If the machine then starts to agitate, then you are looking at a bad switch. If rotating between load sizes doesn't do anything else, then it could be the switch AND/OR the level sensor. The water level function locks out the motor (agitate / spin) until level requirement has been satisfied.
0helpful
2answers

I have a whirlpool duet washer that will not spin at high speed and shows error code f 06

Error F06 is Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes. Check wire harness connections between the Drive Motor/Tachometer and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
  • Check the Drive Motor
  • Check the MCU
  • Check the Wire Harness
0helpful
1answer

Fills with water and that's it!

sounds like the timer is not advancing. Can you physically rotate the timer until the next thing (or anything different) happens?
0helpful
1answer

Hotpoint Aquarius 1100 WM63. fills with water...I dont think it is heating water...rarely rotates and spins (saw it once in early stage of J prog only) seems to fill and empty but no rotate or spin....

if it fill with water then stops it is the ellement the machine first fills turns the drum then heats up the thermostat cuts in and the it emptys rinses and spins so if it does not get to temp it will stop or continue to wash forever
0helpful
1answer

My washer does not spin or move during wash cycle the moter runs but nothing is moving.

Hi, this motor has faulty windings, causing it to lock up and not rotate the drum/basket. replace this motor asap if possible.
0helpful
1answer

Figidare dishwasher

It seems other posts were correct - The upper arm doesn't spin all the time. Once I learned that, and let the dishwasher cycle through, I saw that the upper arm does spin. So, there wasn't a problem with the upper arm afterall. That doesn't solve my crusty dishes problem, but that may have something to do with the soap we're using. We're going to try changing that next.
Dec 27, 2008 • Dishwashers
0helpful
1answer

Will not spin

Hi- if the water does not drain from the m/c, then it will not spin.Check to see if the pump is working.
Select drain or empty and the water should pump out.
If it does not, then you have a draining problem.
Hope this helps.
0helpful
1answer

Washing machine wfm 2010 not rotate just fill and drain water

sounds like the carbon brushes in motor,Or motor has had it.
0helpful
1answer

Washer fills, drains instead of agitating, fills, etc

ON THIS MACHINE WHEN IT AGGITATES MOTOR ROTATES ONE DIRECTION, WHEN IT PUMPS OUT AND SPINS IT ROTATES THE OPPOSITE DIRECTION. YOUR MACHINE IS ROTATING THE WRONG DIRECTION WHEN IT FILLS., INDICATING THAT THE TIMER IS SENDING VOLTAGE TO WRONG WIRES. SOLUTION , REPLACE TIMER.
PS: MAKE SURE ALL WIRES ARE PLUGGED IN TO MOTOR. WHILE THIS IS UNLIKELY , I HAVE SEEN THIS BE THE PROBLEM.

FXIT

FXIT

FXIT
Not finding what you are looking for?

371 views

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Oliver Street

Level 2 Expert

73 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...