No power from cord. I want to replace the cord.

check out the videos that show how it's done.

https://www.google.com/search?q=Rowenta+1700+iron+replace+damaged+power+cord

..

http://www.ccmostwanted.com/store/Sisan-French-Steam-Iron-Replacement-2-prong-Power-Cord-Garment-Steamer_121757232430.html


Google

EBay or alibaba.com

www.laundry.manualsonline.com has free manual

just replaced the power cord, you can buy wire and plug then assembled it to the iron and replaced the old power cord which may cause of shut off.

Hi,

If you've had this iron for a while it sounds like the cord may be frayed.
switch it off at the wall and unplug it, check the cord for wear, if the insulation is frayed, torn or broken and there are black burn marks on the cord where you saw sparks then the cord needs to be replaced.
DONT plug the iron back in until the cord is replaced.

Otherwise If there are no breaks or black burn marks on the cord, then your power point may be faulty and needs to be replaced!

I hope this was helpful
MobileJB

They are called TORX screws. You need a torx set of drivers.

Most high end appliances (like Rowenta Irons) are made so repairs like that can be done. I haven't played with that model, but I did replace a cord on my Norelco. The torx screwdrivers you are looking for can be purchased, and are often found at either specialty electronic stores (not the average Radio Shack), automotive stores and quite readily online. They are also known as Torx Security bits or Torx Safety bits. Most appliances are made with those screws to prevent the average person from having a go at trying to fix it, but, if you feel comfortable enough with the electronics (even just to look for a loose connection), the bits are available and usually at a fairly decent price.

purchase it from==
http://www.powercord-manufacturers.com/
thank you for using FixYa

replace it with a lighter gauge wire or a coiled power type cord if you can find one....

Robert