I have a canon ip2600 printer and i just refilled the ink cart. and it still says my ink is low. i ran the proper tests and it still says it. is there anything i can do
Re: I have a canon ip2600 printer and i just refilled the...
Hold down (most forward) paper feed button (yellow light) for about 30 seconds. Ink minder function will be turned off, and will no longer moniter ink level.
Hold down (most forward) paper feed button (yellow light) for about 30 seconds. Ink minder function will be turned off, and will no longer moniter ink level.Hold down (most forward) paper feed button (yellow light) for about 30 seconds. Ink minder function will be turned off, and will no longer moniter ink level.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please check if there is not some dirt, or something blocking the contacts from reading. Also the ink level is measured by optical sensor that can also be dirty.
Also make sure you use an Original Canon cartridge.
It could be the chip on the cartridge has either gone bad or
could no longer be reset. The chip is what tells the printer
that it is ok to print (i.e. there is ink available and that the
cartridge is approved). Some chips will only be reset with
available procedures a few times. Other times refillers are
not succesful in resetting the chip or just give you another
cartridge that is already refilled and could just
happen to have a bad chip.
You should probably return the cartridge and try to get one
that will work based on the argument that refilling is not
only related to ink but also to chip.
Otherwise here is a web site that has a special page for your Pixma
that contains all possible refill products:
http://www.inkfilling.com/inkjet-refill-...
Source(s):
http://www.tonerguru.com
u cant the printer must detect the cartriges are full using calibrated incss. if this does not work as it has not the printer wont work sorry its time to puy in new genuine print carts
If you have put in genuine Canon cartridges, contact Canon support for advice.
If you have refilled in any other way, your printer cannot detect ink
levels. If you have used a refill kit, you might have problems if you
return your printer for repair under warranty as evidence of refilling
is the first thing checked for
Problem is resetting the IC chip that they install that calculates that your cartridge is empty, Refilling it doesn't work because the chip tells the printer that it'S empty. No way to reset it yet.
×