I have brought transcend 32gb v30 pendrive , when ever i inserted in to my system it shows error message, you pen drive is no formatted dow you link to format now. eventhough i give yes , windows not able to format. now it shows only 8MB memory out of 32GB

Sometimes when a flashmemory stick or USB external hard drive fails because it was not removed fromthe USB port properly. If the device is removed byjust pulling it out of the USB port, it can cause the flash device to fail, youmust click on the Safely Remove Hardware icon on the Task Bar and select thedevice you wish to remove and only do so when instructed to do so When the flash memoryUSB hard drive device appears to malfunction it maybe possible to restoreit by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - AdministrativeTools - Computer Management - Disk Management. Then right click on Disk 1removable drive and click Format. After the flash drive has been formatted itwill indicate that it is Healthy.

insert your pen drive
click start control panel administrive tools ,computer management ,device manager scroll down universal serial bus controllers you should see a yellow question mark?
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver also
click start right click on my computer select open you should see your pen drive
right click then select format
another way is to control panel administrive tools,computer management disk management right click on your drive select format

hope this helps

first conform whether the light in that pendrive is working well when u insert it in the computer...
if it works well then ur computer have some virus problem....format ur computer
if the light doesnt work well
contact transcend website and send ur pendrive to that service center through courier....

Hi,
This might happen due to an error or corrupted MBR, which is the sector that allow you pen to be readable and the PC might not recognize the system file being used.
I would try to connect it to another PC with a different Operating system and format it from there.
alternative you can also use Transcend recovery tool. You can download from HERE

visit link

http://www.transcendusa.com/Products/online_recovery_2.asp?dw=4

first of all transcend do not do a 32gb in V30 - so if its green then its fake - i suggest you try this link it tells you about the fake transcend 32gb - it tells you how to test with h2testw & also you can report the fake from who ever you bought - im hoping you bought via payapl so you can get your money back

http://fakeflashnews.wordpress.com/2009/03/08/transcend-32gb-counterfeit-usb-flash-drive-found-on-ebay-latest-brand-name-to-impacted-jetflash-v30/#comment-92

opening pen drive, it shows 'please insert the disk' & it shows 0 bytes & while trying to format it shows the same message again , i am using 2 gb pendrive of trancend.

On opening my pen drive it displays "Pl insert a disk in drive G

My 2gb hp pen drive showing please insert drive error. Also property showing free space 0 bytes. Please send me hp recovery tool or any equivalent tool to solve the same problem

ic, maybe the usb port of your friend's pc is defective which may cause your pen drive to malfunction, probably a shorted usb port. or just maybe your pendrive was dropped by your friend which damage the drive, it happened to me too before.