Disconnect power then open the door and remove the spring-hoop assembly that secures the door gasket. Peel off the part of the door gasket near the door lock and switch assembly. Remove the screws securing the door lock and switch assembly to the front panel then pull the door lock and switch assembly out. Transfer the wires to the new door lock and switch assembly then install into place. Put the door gasket back and secure it with the spring-hoop assembly. Click on the link below for the detailed procedure.
Replacing the Door Lock and Switch Assembly on Frigidaire Affinity and Gallery Front-Load Washing Machine
Hello partridgemcl - From what you are describing the strike is the part that engages the door switch. It is mounted to the door. The part number is 134456600, MSRP: $6.12. The new seal that you are referring to is the bellows, boot. The part number is 134740900, MSPR: $125.37. You may purchase the part(s) directly from the manufacturer or through a part distributor in your area.
Hello hitman43 - Are the house valves turn on fully? Most common cause is a faulty switch that doesn't allow the value inside turn or a kinked fill hose. Other possibilities can be water valve faults, faulty control board, pressure switch or wiring failure. Contact a professional to move forward accurately.
1,330 views
Usually answered in minutes!
×