Photography Logo

Related Topics:

Posted on Jun 18, 2008
Answered

Easycap USB 2.0 Capture Controller HELP!!!

Ok i installed the CD-ROM with the drivers and then plugged in the device but when i did this it comes up saying 'Found New Hardware' and asks me if i want to locate and install drivers and when i click it it takes ages to locate them but it still does not suceed to find the drivers which i have installed if you can help please do because i really it. Thanks in advance

PS: Im on Vista

Answer This Question
  • 8 more comments 
  • craig1973 Jul 07, 2008

    yes i have same problem installed drivers but cant find

    usb 2.0 video capture controller when i conect it

  • k-fuller Jul 27, 2008

    I have a EasyCap 4-channel adaptor that is throwing the same error. I have Vista Ultimate 64-bit system. The install cannot find the driver, even though I point it to a file that contains the latest version (Syntek SDK1160). Anyone having success with the 64-bit Vista?? Anyone find a video captuer device/driver that will work here??

  • Grob109 Aug 17, 2008

    I have the same problem with my EasyCAP DC60. Tried to install it On VISTA Home Pro 64. When connecting the device, windows prompts for driver, which it can`t then find even if selected manually. It is the Video Capture Controller drivers it can not find. Tried the tip posted on this site, but with no success.

  • Anonymous Nov 22, 2008

    i need those driver. Help me to upload it please...

  • Anonymous Nov 29, 2008

    Capture driver won't work under Vista 64

  • Anonymous Jan 31, 2009

    My vista 64 is same. i try all tricks but it dont work :(

  • romance1000 Apr 20, 2009

    I dont get that "not at this time" window, i did in xp, but not vista

  • Anonymous Apr 24, 2009

    it wont install the hardware stuff dude same problem total ****

  • tekinpekin May 07, 2009

    I got the same problem pleas help me my email is [email protected] pleas let me know

  • Anonymous May 11, 2009

    yes me to think we are stuffed

×

9 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Aug 29, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 29, 2009
Answers
1
Questions
0
Helped
48966
Points
39

You will need to download
XP - http://www.vidblasterus.com/Drivers1150.zip
Vista - http://www.vidblasterus.com/Drivers1160.zip
You must then plug in your device. Then go through the driver update it will say cannnot find and ask if you have a disk click I dont then click browse my pc for drivers. open the zipped folder and extract all the files onto your desktop. Then just select desktop in the driver update and it will install :DD

Anonymous

Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 4 Answers
  • Posted on Nov 29, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Governor:

An expert whose answer got voted for 20 times.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Nov 27, 2008
Answers
4
Questions
0
Helped
49074
Points
36

For those with problems installing the capture driver under Vista x64try the drivers at http://www.gizmograbber.com/upload1/2008218_179_OTH1001%20Drivers%20for%20Vista%2064bit.rar

You may get a warning about an unsafe driver but they worked for me.

Ad

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Sep 09, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 09, 2010
Answers
1
Questions
0
Helped
48966
Points
12

Http://www.sabrent.com/drivers/USB-AVCPTSetup_For_Win7.zip

×

Anonymous

Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Aug 14, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 14, 2008
Answers
1
Questions
0
Helped
48966
Points
6

Hi guys, just install the program first make sure device is not connected into usb port. Read the instructions on the screen. It will install the driver and multiview software you will be instructed to reboot. After the reboot logon to windows and plug easycap respond "no at this time" next next til it finish. Let me know if it works.

Abel

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 2 Answers
  • Posted on Mar 07, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Mar 07, 2010
Answers
2
Questions
0
Helped
50460
Points
7

For those with Windows 7 x64 here it solved:
http://social.answers.microsoft.com/Forums/en/w7hardware/thread/ef0a2d70-8cdc-48ea-85bf-2bb7b80f6dc9

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 3 Answers
  • Posted on Nov 14, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Nov 14, 2009
Answers
3
Questions
0
Helped
50176
Points
5

Drivers work fine on XP.
I managed to install the drivers on Vista and Seven but the multiviewer did not work. Tried Ulead as well but still not success. Guess for now it works on XP only:(

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Sep 16, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 16, 2010
Answers
1
Questions
0
Helped
48966
Points
3

How to update easy cap

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 23, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 23, 2009
Answers
1
Questions
0
Helped
48966
Points
2

Email me at [email protected] and i will send you the cd in iso format or rar, just state which you prefer. Cool

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Oct 02, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Oct 02, 2008
Answers
1
Questions
0
Helped
48966
Points
1

I have loast my cd and cant find the drivers any place anyone know where i can find them please email me and let me know [email protected]

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How can I install it?
Plug it in to the USB port and launch the appropriate software. Try these:



EasyCAP USB 2 0 Audio Video Capture Surveillance Dongle with Mac OS Support

USB DVR EasyCAP USB 2 0 Video Capture with Audio

Amazon com Customer Reviews Hde EasyCAP USB 2 0 Audio Video Capture...

Amazon com Hde EasyCAP USB 2 0 Audio Video Capture Surveillance Dongle AS...
Read full answer
May 30, 2016 • Universal EasyCAP USB 2.0 Audio/Video...
tip

Windows7 64bit & EasyCap directions
Ulead Video Studio SE DVD how to run on Windows7 64 bit systems by Not you. Drivers updated now has drivers for XP Vista and Windows 7 7/16/2010 Getting started,you will need another program its called USB-AVCPTSetup_For_Win7 you can get it here... download links are at the bottom of page.Do not install at this point save to your desk top! Ok your ready Do not plug in your Easy cap usb drive. 1. Put the EasyCap disk into your CD Rom When auto play starts click Run HAutorun.exe a window will open DO NOT INSTALL THE DRIVER !!!! 2. click Install Video Studio,complete the install adding your code with no driver reboot when asked. after reboot remove the disk you will not need this anymore. 3.DO NOT INSTALL THE EASYCAP USB DRIVE YET. 4. Install the software you saved to the desk top (USB-AVCPTSetup_For_win7) reboot your system. 5. Plug in the EasyCap USB stick and wate till the driver installs this will be done auto,in a few seconds. 6. Sorry to say but you need to reboot now. leave the USB drive in its port. You are now installed but your cam will only show a black screen at this point,its ok we are now going to resolve that. Start the Ulead Video Studio. During the start up you'll have the choice of VideoStudio Editor or Movie Wizard click the 16:9 ckeck box at the bottom then click VideoStudio Editor. New window will open click Capture,now look for capture video button on the right side of the black screen,click it Just to the right you will see an Options button click. A drop down will show,look to see if input source is in dark letters,if so open and set source to NTSC/M and composite video is checked. If the input source is greyed out,open Capture properties directly under the input source,a new box will open click properties a new box will open this box will have 3-4 tabs you only need the first tab called Image tab under video sources click ntsc/m and composite video click ok click ok again thats it you should now have video,After any restart you will need to reset ulead up again,you should be good to go...... Hope this helps :-} Here are some pic's to help.Note after the instalation,if you move the Easycap usb drive from the usb port it was installed in and input it into any other port it will not work,the driver will need to be reinstalled!!! 09c750d.pnge0aeff9.png78f955a.png New download links For Windows XP/VISTA/7 32-Bit, please download Windows 7 64-bit This web page I have not goten any link to open but thought I'd add it so you all can see it,if anyone gets it open please post any or all links for us all. Thats all for now I'll upload more as I get them. ps working with a company rep now,update for easycap d60 4 input style,If not getting a picture on input 1 move to 3 for setup and one camera setting.
Read full tip
on May 25, 2010 • DekCell EasyCap USB 20 Video Capture...
0helpful
2answers

How To Install EasyCap On Windows 7
easycap was not meant to used on windows 7 (i think). but i have uploaded all my easycap drivers for you,.... as always right click exe's and in compatibility mode for windows xp service pack 2. if it still not working after driver install go device manager try update drivers from there.
easycap reccomend - ulead video studio for video editing.
the rar file has no passwords. easycap driver and stuff
Read full answer
Apr 22, 2016 • DekCell EasyCap USB 20 Video Capture...
0answers

When I am in the ArcSoft program, the capture option does not list the VCR
Read full answer
Be the first to answer May 05, 2012 • Televison & Video
3helpful
1answer

I have a usb 2.0 easyCap Capture and want to run it on windows7 but require a usb emp audio device driver. Any advice ?
Down load Audacity software, that will run it.
Read full answer
Jan 13, 2012 • DekCell EasyCap USB 20 Video Capture...
56helpful
2answers

Driver EasyCap USB 2.0 Video Capture S-VHS & RCA Video to PC
Driver related problems can be solved with this: Driver Update Software. Wish you best of luck.
Read full answer
Oct 12, 2010 • DekCell EasyCap USB 20 Video Capture...
3helpful
1answer

Easycap video adapter driver will not install on PC from the CD
Goto youtube.com. and search:How to get EasyCap Drivers or http://www.megaupload.com/?d=W64LW1DJ and type in the 3 LETTERS.Wait for the free download on the right side.After I installed the Syntek STK 1160 drivers I still could not capture.THIS STEPS SOLVED IT: 1.OPEN THE ULEAD VIDEO STUDEO PROGRAM 2.CONNECT THE EASYCAP USB DEVICE 3.ON TOP CLICK CAPTURE 4.IN THE MIDDLE CLICK CAPTURE VIDEO.5.UNDER THE WORDS:CAPTURE FOLDER, CLICK ON OPTIONS (THE LITTLE ROUND GEAR OBJECT) 6.CLICK VIDEO AND AUDIO CAPTURE PROPERTY SETTINGS 7. CLICK SOURCE 8. MAKE SHURE TV SYSTEM IS THE ONE IN YOUR COUNTRY 9.CLICK OK.10.A BLUE SCREEN APPEARED AND WHEN I PUSHED THE PLAY BUTTON ON THE DV CAMCORDER I COULD CAPTURE THE VIDEOIMAGE ON THE LEFT SIDE.
WHEN I INSTALLED THE ULEAD PROGRAM I DID SELECT THE TV SYSTEM IN MY COUNTRY(PAL) BUT WHEN I DID STEP. 7, I SAW IT WAS (NTSC).JUST FOLLOW THE STEPS.GOOD LUCK.I SOLVED MY PROBLEM IN 6 HOURS :p
Read full answer
Jan 28, 2009 • Ulead Videostudio 8 for PC
1helpful
2answers

Have EasyCap video capture device and vista x86
I have windows vista and my drivers load fine. Plug in the unit and the drivers load. I have the 4 camera easycap and the VCR easycap. Install drivers first before plugging in the unit. Restart computer, plug in unit, check device manager if there is a stk1150 loaded under image. My problem is getting small files from the recordings. I converted 2 mins of my daughters dance solo and it turned out 1.7gb AVI file without sound. Changing the options to mpeg or WV files will crash the program becuase something doesn't match. I need to play with it more to understand it better.
Read full answer
Jan 20, 2009 • Ulead Videostudio 8 for PC
0helpful
1answer

EasyCAP USB video capture device problem
Did you disbale your FIREWALL whilst you installed the driver, I found this most important. After installation enable your firewall again. I had alsorts of problems till I did this. Even so I feel these devices are somewhat unstable

Hope this helps
Read full answer
Jul 06, 2008 • Video Cameras
36helpful
19answers

EasyCap Video Capture
Hi
I had the same problem. No picture and no sound.
Here is what I did to solve it.

1. I Un-installed the software and restarted the computer.
2. Placed the installation CD (that came with the product) back in the CD drive.
3. Click on "Install Driver" (this only installs the USB 2 drivers so that the computer can see the device)

Make sure you do not attach the Easycap Device before you have installed the USB Driver (as above).

4. Once USB Driver has been installed then plug in the Easycap USB Device, windows should then detect the new device, to make sure:-
5. Right Click "My Computer" "Properties" "Hardware" "Device Manager" check "Imaging Device" (which is where my STK1150 Driver was installed) and make sure it has no yellow exclamation mark next to it.

6. Go back to CD and "install the Uplead Software", you then have to Restart the computer.

Once all installed you can then connect your external device VHS Player/Camcorder etc to the Easycap device, using the Red/Yellow/White leads.

I like many before me, tried and I tried to get the image to play on the software "Capture" screen but all to no avail, I was pulling my hair out, I wasted two days on it, I finally decided that this product was a total load of rubbish and I had wasted my money and it had to go.

Then a major break through, some smarty pants made the comment about INPUTS & OUTPUTS, my prayers along with many others could have been answered ??....

I had actually plugged the Red/Yellow/White leads into the INPUT terminals of the external VHS Player, when they should be plugged into the OUTPUT terminals of the external VHS Player/Camcorder.

On a Camcorder the RED/Yellow/White terminals are usually Output terminals but on a VHS Player they are usually always Input only !!....

I tried running my Camcorder through the software and Hey Presto that worked a treat.

So in order to get my VHS to play through the software I ended up having to buy a Scart OUT (very important "OUT") Red/Yellow/White adapter (see link for product image)

http://www.maplin.co.uk/Search.aspx?criteria=scart%20out&source=15&SD=Y

Once all connected I pressed play on the VHS Player and I have to say that nearly fell off my chair "IT WORKED - IT WORKED - IT WORKED"
Read full answer
Sep 30, 2007 • Ulead Videostudio 8 for PC
Not finding what you are looking for?

View Most Popular

Photography

Related Question

How can I install it?

  • Universal EasyCAP USB 2.0 Audio/Video Capture/Surveillance Dongle

48,976 views

Ask a Question

Usually answered in minutes!

Popular Questions

Problems to open a Samsonite TSA 007 lock on suitcase

Samsonite Tripod

By mistake i have locked my american tourister

Samsonite Tripod

Skybags number lock not opening.reset new number

Photography

Can't see through viewfinder (it's all black) and

Nikon FG 35mm SLR Camera

I loaded my fujifilm instax backwards? how do I get the film out

FUJIFILM Instax 210 Film Camera

Top Photography Experts

Brad Brown

Level 3 Expert

19187 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6405 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66772 Answers

Are you a Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PNG Manual
Screen Shot 2018-05-25 at 10.30.00...

Vivitar Ic 100 Focus...

PDF Manual
201E586.pdf. user-manual-16-665 9"...

Optimus 16-665 9"...

PDF Manual
Bresser 4x21 800 Range Finder.pdf....

Bresser 4X21 800M...

Loading...