I just bought,last August, a Tasco Digital Trail Camera - 119223C . Took pictures until Jaunary 2011, my camera display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for formatting. I bought a new card and changed batteries. no change!
This happened to me too a couple of times. The problem is that your card does not have a good contact. What you can try is turn the camera off and push on the card just like you want to remove it except this time just keep pushing it about 10-15 times and hopefully this will clean the contacts. It worked for me.
×
4,100 views
Usually answered in minutes!
Iam also havin same issues with mine, it turns on flashes but no pics on card and wont record video
Your card is locked. take out card look on the side of it. There is a small white tab on the side. Slide in unlock position.
Thanks. I was racking my brains trying to figure this out. It locked up on my in the field yesterday. I'm kicking myself for not know it was something so easy. UGHHH. Thanks guys!
ok cards not locked but camera stilll says that it is what is it
on the outer edge of the SD card( I found out the hard way ) is a slide lock/right protector lock that prevents accidentally erasing it. Mine was accidentally switched on.. not to sure if all SD cards have this, but I am willing to bet they do...
my problem is that when I slide the sd card in, it goes to the lock position
his right if if you dont want the item send it to me
I had the same problem-on the side of the sd card is a slider if it is pushed up it will lock just slide it back down and the loc will disappear on the trail camera
×