Question about GE WBSR3140DW Top Load Washer
How do you replace fuse?
Posted on Mar 01, 2012
Reset the motor is what you must do.
To Reset the Inverter Board: Push the timer knob in so the washer is idle. Unplug the machine for one minute. Plug back in and raise and lower the lid six times within 12 seconds.
After resetting the inverter board, put the machine in a spin cycle and see if it runs. If not, check for a green blinking light on the inverter board. It will flash failure codes according to the picture above. If no light you probably have a blown fuse built into the neutral side of the harness on the white/red wire.
Hydrowave Repair Notes
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
Posted on Nov 15, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 07, 2016 | Whirlpool Whirpool 3.5cu ft Top Load...
Mar 07, 2010 | Air Purifiers
Oct 29, 2009 | Maytag Neptune MAH5500B Front Load Washer
May 24, 2009 | Maytag Atlantis MAV6451 Top Load Washer
Feb 19, 2009 | Maytag LSE7806A Top Load Stacked...
Sep 07, 2008 | Maytag Performa PAV2200
Sep 06, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...
Sep 02, 2008 | Maytag Neptune MAH5500B Front Load Washer
Mar 16, 2008 | Frigidaire PLDB998A Built-in Dishwasher
388 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: