Could that be maybe an LE code?
Problem:
An occasional LE error but always a slow or no spin.
Solution:
A
Red wire going to the Hall sensor was intermittent. You can test this
from the main board connector down to the connector on the hall sensor
by checking continuity. There is an intermediate connector down by the
motor/hall sensor so you can isolate the problem even more. Problem was
in the short wire harness that connects directly to the motor and hall
sensor. Could not find the open point of the wire so added a new red
wire and integrated it into the harness.
More LG info and your service manual is HERE
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
106 views
Usually answered in minutes!
×