Error Number: B200 A printer error has occurred. Turn the printer off and unplug the power cord of the printer from the power supply. Then contact the service center. Is Displayed Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center.

Instead of contacting the service center you should check out this link: https://errorcodespro.com/5-fixes-for-the-canon-error-code-b200-solved

I Know this B200 Error.

Canon Printer Error B200 has been used very commonly by Canon Printer customers. The positive point, though, is that there is a procedure that you can pursue to handle and correct this error.

Canon Printer Error B200 on canon printers means that printing head voltage or printhead heat is not natural. In certain cases, Canon Printer Error B200 can either indicate that the print head has been broken and should not be used or that there is an issue with the cartridges.

Easy Solution of Canon Printer Error B200:-

1. Switch off the printer. Remain until the cartridge carrier returns on the side.
2. Switch On the printer.
3. Extract the cartridges. Check the nozzles and brush them if there's any clogged or dried ink.
4. Reinstall the cartridges.

Contact here - Canon Printer Error B200

Thanks For Reading

The fault in Canon Printer Error Code B200 indicates a defective print head. A print head is a component that directly collects the ink onto the paper from the cartridges, which means it's one of the most critical parts of the printer.
Canon Printer Error Code B200, which can signify a hugely damaging system error, is one of the most feared.

Want to Correct the B200 Canon Printer Error Code?

1. Unplug and leave your printer disconnected for a minimum of 30 minutes.

2. Open your printer's door and you can move the print head so you can reach it.

3. Take off old ink.

4. The complete Canon Printer Error Code B200 solution.

Check this Blog - Canon Printer Error B200

Hello and Welcome to FixYa!

According to Canon's documentation, Error B200 is simply listed as a printer error (not very descriptive). It is likely a hardware fault on a board, a physical hardware malfunction. To resolve the error, Turn off the machine, and unplug the power cord of the machine from the power supply. Again connect it and turn on.
If the problem is not resolved, then best option is to take it back where you purchased it or contact Canon service center about the error code.

I hope this solution helps you
Thank you and Keep Visiting FixYa!

That error code is not listed on the known error codes for that model. Something to try is to turn off the machine, unplug the power cord from the power supply for five minutes. Plug the cord back in and turn on the machine. Give that a try and see if that fixes your problem. Otherwise I would suggest contacting Canon customer support at 1-800-OKCANON. Take care & good luck!

Turn off the machine, and unplug the power cord of the machine from the power supply. If the problem is not resolved, contact your Canon service representative.