How i can connect the tv as my computer moniter

your monitor not convert to tv, your computer must convert to receiver. you should install a TV card.
TV card is a hardware and can receive TV Signals like antenna

What you should try at this point is shut everything down, Unplug your desktop, hook it back up to tour moniter and boot. If you now get a picture, go to your device manger and click on display adaptors. If you have more than one selection. choose your monitor. Let me know if this works.

yes your computer is running a different HTZ ... that vga is really made for a external computer moniter not a TV :() thou it can be done the picture is S%%T

Yes, you need a 3.5mm male mini stereo to male mini-stereo cable. Plug into small hole in monitor to lime green port of computer

Hi I am a silver surfer but this is how I got it working
First off get the program tou want to watch up on PC Moniter(screen) Then connect 3 cables
Yellow cables / One end to tv other end to yellow hole rear of PC/TV Box

Grey cable small end goes in PC/TV Box just behind the wirds "kworld" other end goes into back of your Computer ,you need to check your Computer manual to see the which one is the connection to your Computer screen(moniter),mine was blue with 2 screws , disconnect this and screw in Grey cable

Black cable narrow flat end into front bottom of Computer ,other end intoPC/TV Box end hole next to yellow cable

Switch on TV and change AV until you see your program, sound will be thu your Computer Speakers NOT your TV

THIS IS FOR A DESKTOP COMPUTER

What model tv are you using.

If the TV part works normal then you are probably trying to use a resolution and or refresh rate the monitor cannot handle. You want to be on 1024x768 max and 60hz refresh. You can try starting the computer in safe mode to test.

Yes your model was designed so you can use it as a monitor. the user manual explains how to set it up.

you shuld have s-vedio out from your vga card
if have it now you can connect it from the cable coming with card

try going to your local radioshack and asking for a cable to do it. Tell them it needs to be "double male" infering that the piece sticks into another part instead of bieng stuck into. Then tell them one end needs to be "RCA cables" (the red white and yellow ones) and the other end needs to be a computer moniter cable. There are several types of moniter cables you can use, look in the back of your moniter to see what you have. There should be writing that says any 1 of the following "s video in", "dv in" "video in" etc. ask the radioshack man to get the non RCA side of the cable to have one of these on it. If you need to, it helps to take a picture of the back of the moniter where all the input plugs are, and show it to the radio shack man, he can probably help decide which cable to use. Once you buy the cable, plug the red yellow and white side into the red yellow and white holes respectively on the PS2, and the moniter cable into the moniter. Turn on the moniter and the PS2 and... Voila. PS You may need to take out the cable connecting the moniter to the PC to put in the new radioshck cable. I hope this works for you-BCA