Plug off the mains. First drain out all your water by lowering the exit hose into a bucket or drain. You have to look for screws below the front kick-panel, the panel comes down & out. The pump is on the right side. Be prepared for dirty water. Inside the big flexible tube (coming from the tub bottom) is the filter, be prepared to find all sorts of junk here, clean out. Examine your pump also, clean out the impeller. Carefully refit all. Your machine would be fine. Don’t wait for the machine to jam to look into your filter.
My front load washer has an E20 error code that will not allow my washing machine to finish the spin cycle. How do I fix this error?
It means that machine isn't able to drain. Either check the filter, make sure the house drain isn't clogged, or if the hose is kinked.
My frontlad gives e20 code
Hello Diane Snow, thank you for your inquiry!
I understand that your Frigidaire washer is displaying "E20" error code. The "E20" error code means water is not pumping out fast enough. First, you want to check the hoses for restrictions.
If the hoses are not restricted it could be an issue with the drain pump or control board. I would suggest seeking assistance from a professional technician for proper repair. I hope this is helpful. -Matt
1,760 views
Usually answered in minutes!
E20 err code comes on in middle of cycle and cycle will not finish. I have tried restarting the cycle and it gets partly done and will not finish. If it does comlete the clothes are not spun out comletely and remain too wet to put in dryer.
Same thing happens to mine!!! HELP!!!
The E20 code comes on in the middle of a cycle and then it it will not drain completely or spin close out.
Please help with E20 error.
error 20
What does it mean?
Does anyone have a diagnostic code chart for this?
e 20 code
where the fliter at
i keep getting E20 error code
×