Using Motorola S10-HD bluetooth headset paired with both my Samsung Rogue phone and my 64G Ipod 4th gen. Now headset will only pair with one device at a time.Is this a 4.2 os problem?

turn bluetooth on ,on both units,search for devices with your phone when it finds head phones click on it and pair them

1.first on samsung bluetooth device
2.press& hold call answer button in bluetooth device now light is on ,not blinking
3.and then search your bluetooth device by your phone and pair.

ok, this is a bit complicated of a matter so ill make it as simple as possible. First of all, the first generation iPod Touches DO NOT have bluetooth capability, so if your ipod is a first generation you cant use bluetooth. Second, the iPod must be running on the latest firmware, which can be updated through iTunes. Third, iPod Touches CANNOT pair with bluetooth headsets (such as the ones you use with a cell phone the go over one ear) however they CAN be paired with bluetooth HEADPHONES (go over your entire head to cover both ears) now assuming you meet the above criteria, the option for bluetooth is in Settings>General>Bluetooth On. place the device in pairing mode and it should be discovered. if it is not, you are using an incompatible Bluetooth Device. Hope This Helped! Remember to Rate

assuming you have bluetooth installed on your laptop,
1) you have to disable the bluetooth pairing of your s9 with another device that you may have paired with it earlier - like a mobile phone. disconnect previously paired devices first.
2) turn on the bluetooth feature on your pc and ask it to "search" for devices. assuming your s9 is on standby, your pc should be able to "locate" and pair with it assuming the s9 is within an arms length distance from the computer.
3) make sure that the s9 is completely charged to eliminate that power issues as well

Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps

Chris (ziraffa)

You have to hold the on button until it is a solid blue light not flashing 5 or 6 seconds then it is ready to be paired.

try to power cycle the cellphone by turning it off and remove battery, then reinstall and turn it back on


For headset pairing

How to pair the phone with a Bluetooth™ headset The phone identifies and maintains up to 16 devices which are displayed in a list. To add a new device or pair a headset via bluetooth, turn Bluetooth™ on in both devices.

1. Put headset in pairing mode. See Headset User Guide for more information, if needed.
2. Turn on Bluetooth in your phone, Go to menu, [SETTINGS] > [CONNECTIVITY] > [BLUETOOTH] and press "Select"
3. Choose [TURN ON] , press "Select"
4. Choose [MY DEVICES], press "Select"
5. Choose [NEW DEVICE], press "Select"
6. Choose the headset to be paired and press ' Select '
7. Enter the pass key '0000', press "Ok"

Link for headset setting, just choose the headset model

http://www.sonyericsson.com/cws/support/products/pairinginstructions/w300i?cc=us&lc=en

If you are using a different device the just set the Bluetooth to on on it as well

You will never be able to pair the d200 to a phone or another device, for this is a a2dp bluetooth dongle, that´s why it works with your headphones.

It is very hard to lend a helping hand with this issue seeing that i also have tried pairing a smaung mobile with the HS500 bluetooth headset and it paired without any issues, what you can do is delete and other devices that you may have had in your device list then try it again that may help you.

1.Explore blue tooth devices from your motorola phone.
2.it will sure find your blue tooth headset.
3. Make sure your blue tooth headset is on
4.in pairing function select your blue tooth headset