My proform treadmill turns on and the inlcline works however the belt does not move. Any suggestions?

Question edited for clarity.
Question moved from Medical EKG Machine to Pro-Form Treadmill.

https://www.google.com/search?q=pro-form+770+ekg+reset+button

..

Question edited for maker name.
Question moved from Building Materials to a Proform Crosswalk category.

Either the belt is too slack or it needs to be reset.

https://www.manualslib.com/manual/672296/Pro-Form-Crosswalk-395.html?page=20&term=reset&selected=9#manual

..

https://www.youtube.com/watch?v=oodHWR8d8T0

Watch this video for help.

Customer Reviews: Proform 505 CST Treadmill (2014 Model)

www.amazon.com/Proform...Treadmill.../B0048HS02...

Amazon.com, Inc.Start here. ..... I was worried it would fall out with the vibration but, as I mentioned earlier, ... The 10% incline and the max speed on this unit more than serves the need ...The sound from the belt and motor is very acceptable (but then its only been .... This morning i was using it for the first time and this treadmill seems great.

Amazon.com : Proform 505 CST Treadmill (2014 Model ...

www.amazon.com > ... > Cardio Training > Treadmills

Amazon.com, Inc.Start here. ..... The ProForm 505 CST Treadmill is designed to get you moving. ....This morning i was using it for the first time and this treadmill seems great. ... I would suggest for anyone that gets this to open up the motor cover and take a look at ...graphics on the instruction manual and figure out what piece went where .

505 CST ' Proform

How can I get my Proform 320X treadmill from stopping a ...

www.shopyourway.com > Manage My Life > Questions
How can I get my Proform 320X treadmill from stopping a few seconds after starting? ... -why-does-my-proform-treadmill-belt-only-move-a-few-seconds-stops

ProForm Treadmill 320x User's Guide ' ManualsOnline.com

fitness.manualsonline.com > ... > ProForm Treadmill
ProForm 320x Treadmill User Manual. Page 1. Page 2. Page 3. Page 4. Page 5. Page 6. Page 7. Page 8. Page 9. Page 10. Page 11. Page 12. Page 13.

At the end of of the running belts in the end caps will adjusting bolts you will need a allen wrench to adjust the tension. Start your treadmill and turn clockwise a 1/4 turn each time see i f you can stop the belt. You need to be aware that the drive belt can also cause this problem so I suggest that you remove the motor shroud and when you are adjusting whether the front roller is moving and the running belt has stopped or the roller has stopped and motor is rotating ( adjust Drive Belt)

if you hear the motor moving with no belt turning the problem is either the front roller or the drive belt. If there is no motor movement then this is usually an indication of a bad control board located under the lower section of the treadmill.

change drive belt proform xp 550s treadmill

Motor controller.

My Proform 550 doess not work the treadmill is not getting any power. Wht might the problem be.