If your Nissan Sentra does not come with Bluetooth built-in, you can still add it with an aftermarket Bluetooth receiver. These receivers can be found online or at electronics stores and are relatively inexpensive.
To install the receiver, you can follow these steps:
- Turn off your car's ignition and open the glove box.
- Locate the back of the car stereo and find the auxiliary input port. It should be a small, round port labeled "AUX."
- Connect the Bluetooth receiver to the auxiliary input port with a 3.5mm auxiliary cable.
- Connect the Bluetooth receiver to a power source, either through a USB port or a 12-volt adapter.
- Turn on your car's ignition and switch the car stereo to auxiliary mode.
- Turn on the Bluetooth receiver and pair it with your phone.
- Once connected, you should be able to play music or take calls through your car stereo using the Bluetooth receiver.
Keep in mind that some aftermarket Bluetooth receivers may have slightly different installation instructions, so be sure to read the manual that comes with your specific receiver.
- phone model and manufacturer
×