The Maxtor One Touch has a 12V transformer that steps down the 1110Vac to 12V ac and then runs it through a circuit board in the transformer package, that then converts it to 12V dc. That 12V dc (really 14V dc without a load) is then outputted through the attached cord to the jack that goes into the drive. If you look at the data plate on the transformer package, you can discern this information.
A pictoral schematic neg----- C<-----pos appears on the package showing that the shell of the jack is negative while the pos is the inside pin. This is only used on DC applications. Also words on the package say input 110 output 12v dc.
12V DC
263 views
Usually answered in minutes!
×