Drum error - Brother MFC-7820N Printer

Do you have an actual error or is the drum stating end of life?
If you have real error, error code will be needed.
If your drum is stating end of life, then check ebay for reset chips. These chips will reset your life counter.
But at some point , the drum will fail. Also no not shine strong light on drum and do not work on drum in front of sunny window, sunlight will kill drum.

Toll-Free +1-866-231-0111 Brother printer receiving the 'Drum error'? Then, you have to clean the corona wire on the drum unit of your printer immediately to resolve the issue. Brother Printer users often face this common error but before calling the company for an instant tech-support, trying some steps can help to resolve the issue. Have you been facing the issue for quite some time and keep asking yourself How to Fix Brother Printer Drum Error? Then we here have some solutions for you. Follow the given steps and DIY resolving the error and see whether it's gone or not.

Step 1 Fix Brother Printer Error Drum

· Slowly open the lid of the printer and remove the drum unit
· Also, remove the toner cartridge assembly
· Keep a piece of paper on which the parts can be kept to avoid spilling of the toner

Step 2 Brother Printer Error Drum

·If the error Drum still persists, you have to replace the drum assembly.
·Consider resetting the Drum Counter
·Press the 'Menu' option> click on the 'Machine Info'> now click on 'Reset'
·Press Ok
·Now Press 1 to reset the drum unit counter
·Press Stop or Exit when

Brother Printer Customer Care Number +1-866-231-0111

If the mistake occurs, call for instant assistance at the Brother Printer Customer Care Number +1-866-231-0111. We are a 24 * 7 group of well-qualified and experienced engineers. We are willing to help you with your toughest printing mistake. Our techies strive to provide analyzed responses to all inquiries linked to the client

Drum motor error;
The machine detects a lock signal error from the drum motor for 2 seconds after the drum motor turned on.

• Overload on the motor
• Defective drum motor
• Defective harness
• Defective IOB

Try removing the drum and turning the gears.

Fatal error code 173:
This error indicates that the Image Drum Up/Down Process is not working properly. The errors are as follows:
140 - Yellow Drum Up/Down error
141 - Magenta Drum Up/Down error
142 - Cyan Drum Up/Down error
Solution:
1. Reseat the Image Drums. Ensure they are in seating properly into the drum carriage.
2. Reseat the Toner Cartridges. Ensure they are seating properly into the Image Drums.
3. Reseat the Contact Sensor Spring assembly and inspect it for damage or mis-alignment. If the springs appear bent or dis-lodged reseat them.

Many drums have a chip with a lifecycle. You may need to replace the chip if you dont want to replace the drum.

Sir/Madam

he following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.

• Replace Drum
• Drum End Soon
• Drum Near End
• Drum Stop

To clear these error messages, you need to reset the drum counter,
Or Visit official Brother Printer website For Brother Printer Troubleshooting Page Url Below:http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/002800/000037/faq002837_000.html?reg=us&prod=mfc7340_us_as&c=us_ot&lang=en

Or
Still Having Problem then follow Us On For

Brother Printer Support

oki printer c5950 fix new cartridge & drum coming error replace image drum 561:m drum life

Cause:
This error indicates that the Image Drum Up/Down Process is not working properly.

The errors are as follows:

140 - Yellow Drum Up/Down error
141 - Magenta Drum Up/Down error
142 - Cyan Drum Up/Down error


Resolution:

1. Reseat the Image Drums. Ensure they are in seating properly into the drum carriage.

2. Reseat the Toner Cartridges. Ensure they are seating properly into the Image Drums.

3. Reseat the Contact Sensor Spring assembly and inspect it for damage or mis-alignment. If the springs appear bent or dis-lodged reseat them.



http://my.okidata.com/PP-C7200.nsf?opendatabase

Sc 491 straight from manual

High voltage power: Drum/ development bias output error
An error signal is detected for 0.2 seconds when charging the drum or
development.

High voltage leak

Broken harness

Defective drum unit or development unit

Defective high voltage supply unit

1. Check or replace the harness.
2. Replace the drum unit or paper transfer unit.
3. Replace the high voltage supply unit.

E020 is a Drum/developer error code

-01b0 is a yellow drum error

-0260 is a magenta drum error

drums need replaced

7622A001AA Yellow drum part#

7623A001AA Magenta drum part#

7624A001AA Cyan drum part#

7623A001AA Black drum part#