At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
What does SC571 refer to? I couldn't get the "107" solution to work--tried as many combinations as I could. I did empty the used toner trays in case that's applicable. What does SC571 refer to? I couldn't get the "107" solution to work--tried as many combinations as I could. I did empty the used toner trays in case that's applicable.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://www.google.com and the search word SC571 gives a number of possible fixes. Unsure which model Ricoh copier you have, but when you read the search results you will be able to identify your model and see if the problems described match yours.
SC 792 :Finisher error . The machine does not recognize the finisher , but recognizes the relay unit . Possible causes :Defective connector defective cable incorrect installation
solution found on copytechnet.com sc571 on this machine means fuser oil overflow.
check the oil out sensor connector.
use sp5 810 to reset this and most other codes.
This is a Corona cleaning unit error. You either need to get the issue with the corona cleaning unit fixed or have a service technician turn off the automatic cleaning function. SP Mode 2 801 3 (technican will know what this code means) I can not tell you how to do this as you can total mess up the machine if the service mode is not used properly. Turning off the cleaning will solve the error code. Technician can clean the coronas himself on service calls so automatic cleaning is not required.
Good Luck
See thread I left you this morning on this. I hope it helps.
Press the yellow button. Press the 107 keys. Press and hold the red clear button for a few seconds until the service mode screen appears on the LCD display.
Hi,
This SC code relates to the charge corona cleaner not working or not working properly. the charge corona is located towards the bottom left of the machine after opening the front cover. It will have a screw you can undo by hand and a cable with an end like a telephone cable plug. toner may have fallen in to the unit or the motor that drives the cleaner along the wires has decided to jam up. remove the charge corona and blow it out with compressed air. You can also remove the end of the unit and check that the motor is not gummed up. Be very careful you do not break the hair thin corona wires! Hope this helps.
What does SC571 refer to? I couldn't get the "107" solution to work--tried as many combinations as I could. I did empty the used toner trays in case that's applicable.
do you know how to enter service mode?
×