How to disassemble philips 4891 hair dryer? - Conair corp pers care 1875W CHR Hair Dryer hair dryers

Hello Philip, I appreciate your inquiry!

Based off the information you have provided you need help with replacing the belt on your Frigidaire laundry center. In order to access the pulley you would need to disassemble the laundry center. I would recommend seeking assistance from a professional technician for proper disassembly of your laundry center. Incorrect disassembly could cause personal harm or future issues within the laundry center. Best of luck! -Matt

hi
If the model is like this one you can use a paintbrush and with the hairdryer unplugged you can wipe the net full of dust. Then blow with air compressor if very dirty.
Plug it and enjoy

There is one Philips head screw near the top of the handle and there are four more behind the rubber on the handle grip. The rubber on the handle grip is attached to a curved plastic plate that has four clips that hold it to the handle, you have to pop the plate with the handgrip rubber off the handle to access the four screws.

I don't have any indication of what model or brand of hair dryer you have, but a lot of portable electric accessories have one or 2 hidden screws under a brand label or some stick-on instructions. If not, need to know brand and model #'.
To answer on your comment about "dryers" instead of "hair dryers", I assume that the incoming messages are scanned quickly for key words and slated in the most likely category. That's my take on this. Good luck and let me know if you found any screws.

Let it be. It's a good practice. Keep an other Hair Dryer. It will be best for you I assumes. Can you troubleshoot its main power supply regulator board. If so, google.com/+GopakumarGopalan check this link, and come over to me.

dimitris, use brush to clean hair and don't open the machine.

I had to disassemble the PHILIPS SalonPro Ceramic HP4890 to fix the damaged power cord. With no previous experices in this models of hairdryers, it was hard to find the way to take out (slide) the main plastic cover. I had to force the front plastic ring to come up and free the main cover; the main covers slides and then the side covers can be separated (triangular recess screws) to access to the interior of hairdryer. I forced the front ring with the tip of a screwdriver so the piece was damage, but not broken, later I came up with the idea of using a nylon thread (or fishing line) to surround the ring and pull to avoid the damage. No doubt that these hairdryers are not made to be disassembled but not impossible. Hope I help.

How to take apart philips hp 4891 hairdryer - Fixya

www.fixya.com/support/t6181177-apart_philips

Sep 27, 2010 - how to take apart philips hp 4891 hairdryer - Dryers question.

Hair Dryer Repair - iFixit

https://www.ifixit.com/Device/Hair_Dryer

iFixitHair Dryer troubleshooting, repair, and service manuals. ... I want to use hair drier without the heater element · Hair Dryer. 3 Answers ... Phillips #1 Screwdriver.

How to repair the hair dryer not working not turn on - YouTube

? 1:02
https://www.youtube.com/watch?v=WITmaE5F9bI
Aug 16, 2012 - Uploaded by comohacerunomismo
This guide explains how to repair the hair dryer of our favourite brands: Phillips Taurus Palson Braun Solac ...

Once a piece of electronic equipment gets wet, you need to disassemble it, remove the battery and dry it carefully using a lint free cloth. Then use a hair dryer to dry it out. Do not put the hair dryer too close as you could overheat and damage the item. If you wait too long to do this, the water may have already fatally damaged your phone as things begin corroding quickly. Good luck!

Once a piece of electronic equipment gets wet, you need to disassemble it, remove the battery and dry it carefully using a lint free cloth. Then use a hair dryer to dry it out. Do not put the hair dryer too close as you could overheat and damage the item. If you wait too long to do this, the water may have already fatally damaged your phone. Good luck!