At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The speakers are not connected properly.
Check the speaker connections.
The Mute function is activated.
Turn off the Mute function.
The volume is turned all the way down.
Turn up the volume.
Neither set of speakers is selected (if unit has A/B buttons to select sets of speakers).
Press either A or B to select a set of speakers.
Both sets of speakers are selected, but only one set is connected (if unit has A/B buttons to select sets of speakers).
Press the appropriate button to deselect the speaker outputs which are not connected.
The receiver is set to TAPE MONITOR (if applicable).
Turn off TAPE MONITOR mode.
Headphones are plugged into the main unit.
Unplug the headphones.
The source selector is set to the wrong source.
Select the proper source.
The impedance of the speakers is less than the rating for the system.
Use speakers with the correct impedance rating.
test this God bless you The speakers are not connected properly.
Check the speaker connections.
The Mute function is activated.
Turn off the Mute function.
The volume is turned all the way down.
Turn up the volume.
Neither set of speakers is selected (if unit has A/B buttons to select sets of speakers).
Press either A or B to select a set of speakers.
Both sets of speakers are selected, but only one set is connected (if unit has A/B buttons to select sets of speakers).
Press the appropriate button to deselect the speaker outputs which are not connected.
The receiver is set to TAPE MONITOR (if applicable).
Turn off TAPE MONITOR mode.
Headphones are plugged into the main unit.
Unplug the headphones.
The source selector is set to the wrong source.
Select the proper source.
The impedance of the speakers is less than the rating for the system.
Use speakers with the correct impedance rating.
Yes, there is a speaker option. Holding the phone in your hand look down to the lowest row of buttons - below the * 0 # buttons. There are four buttons: from left to right they are SPEAKER; PAUSE/REDIAL; REMOVE/MUTE; and, INT (INTERCOM.) Pressing the left/SPEAKER button one time turns on this feature. Pressing this button turns OFF this feature. Hope this was helpful.
there is a button on the side of the phone with a picture of a speaker on it, it is right under the camera button. if you hold the button with the speaker down for a few seconds the speaker phone will turn on, make sure the phone is open when you do this and you follow the same steps to turn the speaker back off
There is a speaker button on the side of the phone just below the camera button. I believe if you hold down the speaker button for a few seconds it should turn off.
×