After few seconds phone automatic gets switch off

Why don't you flash your phone ? Click here1 if you think you can or contact mobile repairing shop.And follow this link to get your flash file 6300 file.If you need further help do not hesitate.Thanks for visiting fixya

wrong Answer this code *#7780# is not working for 1108

Flashing of software is the only way....these problem happened very frequently to mishandling..like using of excessive mmc(only 512 mb is supported guidelines by NOKIA).Taking and giving data via bluetooth.(virus can easily infect).If you think that you can do it just follow the trick...but if you don't believe so please [email protected]

First download and install Pheonix. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link 3110c file or Nokia flash file and install it to C / programme files/pheonix..after finished this installation open pheonix Inside the interface at the> left top <there you see "File" click there and choose "open file" and then select the approprait Product type i.e"which is written in the back banel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there when you click there you'll see three icon just select the "Firmware Update" again you'll see another interface.Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Botton and choose the code which is written in the back side of your phone.e.g CODE:0000000.if the same code does not found just take one.After this you can see "Dead phone USB flashing" click that box.Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead,unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" after this, a message will prompt you "press power botton" press it and wait untill the phone will Restart automaticlly in normal mode 10-15 minutes.If you cannot understand just make a Reply thanks for visiting fixya.Good luck

facebook chat "jordan raingam" or give me your email id.This is a software problem so i can solve it via internet.....

ALL YOU HAVE TO DO IS TO CHANGE THE POWER FLEX

Sounds to me like your phone battery is empty or damaged. Try to fully charge the battery and then try to start the phone again.

If that doesn't work, you will need a replacement battery - try ebay.

u can chenge u phone battery if the prob same then u can check u battery terminal

maybe your phone got virus so that its not working properly
u just install anti virus software for your mobile and delete virus or reset your mobile

Common problem on 7610 and other nokia symbian. If nokia logo blink more than 3 times after power on the phone, that's a software problem, ( phone wont boot to its operating system ).

You can try to hard format the phone. Here the way , press ( *,3 ,and call ) buttons togeteher while you pressing power on key. Hold on about 15 seconds till nokia logo blinks 1 time, and formatting message appear on LCD screen.

If dont work, you must reflash ( reinstall ) the operating system using proper repair tool and software, many service shop in asia have this tool.

you need repair with the p2k tool software or with the smartmoto program...

that happenig after incorect unlock

becareful not try unlock or flash with the uncharge battery.. the phone may to death..

excuse may bad english..