At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Was the error preceded by 81:01 or 81:11? That is the format for the actual error on a 500 series plotter. If so then you have a Paper-Axis shutdown. Corrective Action: If this error code appeared but was NOT caused by a paper jam, then try the following: Carriage Belt if it is frayed or worn out, if it is good then Replace the Encoder Disk Assembly.
Whenever switchon my Dc12 The mahinc ready within 5 minutes and final
stage it shows the eror like "System Fault" error code 3 -380 Switch of
your printer and on. How can I solve it.
Your description is not clear. Replacing a fuse does not repairs the fuser. But if you replaced the whole fuser with a brand new one (not refurbished) then you have a bad power supply board. Unfortunately, you need to get a new copier.
×