Can you tell me what code FK1 means? - Sharp MX-3501N All-In-One Printer

Hi,
Yes it will if SNMP is ticked in the Ports tab situated in the printer properties of the print driver. To check this open up Printers & Faxes on the PC, right click the sharp printer & select "printer properties" Click on the 3rd tab along(Ports) & on the lower left hand side you should see the SNMP box. If it is ticked then untick it, apply & OK. This should allow to print. If this box is ticked then when the copier displays any maintenance code it wiil allow copying but not printing.
Hope it helps.
Dave.

FK1 refers to the maintenance life counter for the fuser unit.
The fuser rollers have a fixed life count & when that count is reached FK1 is displayed. If the rollers are worn they should be replaced but if they are ok you can reset the fuser maintenance counter in SIM 24-4 FUSER UNIT

Since you neglected to state the type of device, make or model, I am assuming everything and sending you what I guess!

http://search.aol.com/aol/search?&s_qt=sb&q=service+codes+fk1%2Cfk2%2Ctk1&tb_oid=07-01-2013&s_it=amonetizetest1-ie&tb_mrud=07-01-2013&tb_uuid=20130107163427450

http://search.aol.com/aol/search?&s_qt=sb&q=service+codes+fk1%2Cfk2%2Ctk1&tb_oid=07-01-2013&s_it=amonetizetest1-ie&tb_mrud=07-01-2013&tb_uuid=20130107163427450

http://search.aol.com/aol/search?&s_qt=sb&q=service+codes+fk1%2Cfk2%2Ctk1&tb_oid=07-01-2013&s_it=amonetizetest1-ie&tb_mrud=07-01-2013&tb_uuid=20130107163427450

Autozone and some other auto part stores will scan for free and tell you what all the codes are/mean.

That is a maintanence code. Usually says that the fuser rolls are at a certain copy count.
Here is what to do.
Press in order on the consol. # * C * That will enter the machine into what is called SIM mode.
Then enter the number 24 then 4 for that code, then press execute. You may want to just do the clear all maintenance code too.

It means that your fuser unit has reached its lifespan: you can still use the machine but be aware you will need a fuser rebuild in the near future

You have a bad FUSER unit....expensive!! It is not heating up.

usually with mitsubishi a 1 2 code is no error

call autozone or orielleys or advance and tell them that code nd they will tell you what that code means, if u got the code from a code reader that u plug into the car thru and obd 2 reader then they can tell u

fuser count has reached 200,000 copies. hit P*C* then 24, start, then 4 start. select Fuser Unit and Fuser Acum Day then execute at bottom then yes. Hit CA button. copier should reboot and clear code.