HF code error - not sure what that is.
thanks...Glenn
Okay this actually happened to a friend who asked me to help. In fact this error comes up to indicate low water pressure of some sort. In my case, the issue was a direct result of a worn hose that was slightly punctured and was causing the low pressure indicator HF error code to come up. The hose was located connected to the Pressure Switch # 8181695. The way I fixed it remove it and you can go to a hardware store to get approximate length and width and replace. Good luck!
In the article, on checking the drain pump, it recommends draining the wash drum. How do you do this if the door is locked and the buttons won't yield any results or unlock the door?
Here's a link that explains the "FH" error:
http://www.fixya.com/support/r615354-fh_error_code_whirlpool_duet_kenmore
If you have questions about the information I provided, or need further assistance in trying to determine the source of your problem, please post back and let me know. I hope this helps provide an answer for you.
Okay this actually happened to a friend who asked me to help. In fact this error comes up to indicate low water pressure of some sort. In my case, the issue was a direct result of a worn hose that was slightly punctured and was causing the low pressure indicator HF error code to come up. The hose was located connected to the Pressure Switch # 8181695. The way I fixed it remove it and you can go to a hardware store to get approximate length and width and replace. Good luck!
×
Hi
LF means Long Fill, this error flashes when the water level does not change for a period of time after the valves are turned on OR water has disengaged the basket but control does not detect a water level change. Check whether water supply is connected and turned on. Make sure the hose is not blocked and hose screen is clear. If so make sure pressure hose connection to machine/motor control is fine. Also check the continuity of water inlet valve, use a multimeter to check the continuity. Hope this helps... Please post back if you need more information.
Daniel
1,791 views
Usually answered in minutes!
Got the FH code. Door won't unlock and none of the buttons will work. Unplugged for several hours and when replugged, no luck. Machine making a groaning noise. How do I get door to open to make sure water is drained, or how do I drain water to check pump, etc?
×