Security code forgotan i want reset my sec code

Check the manual

Only you have the security code. Do a RESET of the D-Link, this will reset to default settings. Press and hold the RESET button until the D-Link resets , 30 sec. or so, Reconfigure the SSID and Security code. Take a look at this: http://support.dlink.com/emulators/wbr2310/index.htm

You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

press #06# to view your imei then visit cellunlocker.net

SECURITY CODE:

Security code is kept to prevent some one who steals the mobile entering into your mobile data and using it . Once you reset the security code the data will be lost.
If it is lost nothing can be done. You need to flash your mobile at an authorized service center which will reset the mobile memory and also all the data inside the mobile will be lost.

Your chances are up (3 chances) so now your phone SHOULD say "Enter PUK code" which then, you have to contact/ go to their shop of YOUR PHONE PROVIDER [eg orange vodafone, tmobile, etc] and then they will TELLyou the PUK code (free of charge), type it in AND your phone will be back to normal .

@ Chaina6300:-

Hi,

This is the Master Reset Code for Nokia 6300 for your IMEI.

IMEI: 358649015418942

Master Reset Code: 7740552014
___________________________________________

@jsisonunderg

The Default security code for Nokia 6300 is 12345
___________________________________________

@ viva house

Can you tell me your IMEI no?

It can be get by Pressing *#06# on your Nokia

Try with this code 1030227003

Hi redevil,
For resetting code, u need to bypass the security code.
To pass the security code, follow this step :
1) when it asks for security code, press and hold menu button(the top button above the direction keys) for 3-4 secs.
2) then the gap for inserting security changes from 4 to 6 lettered.
3) type 000000 (six zero) and bypass the security code.
4) Use same process while changing or reseting ur security code. OK!
================================================
Send me feedback and rate my solution.
Be sure to post a clarification request for ur problem after it is solved.
SAJAN ([email protected]/[email protected])

1125306552 try this code