' Fagor 2h-134 I ' cooker manual needed

Try this

• Error code E01 showing on display
• What causes an E01 error code on the CT Electric Cooktop control panel?
• CT E01

STEPS TO VERIFY ISSUE:

Turn the home circuit breaker to the unit off for 30 seconds then back on again. Then retest the unit operation.Or contact the maker direct. They are expensive units and in my experience, if you get 2 years out of them in a commercial setting, you are lucky!

INDUCTION COOKERS - Omcan

omcan.com > ... > INDUCTION COOKERS

INDUCTION COOKERS. Home FOOD EQUIPMENTCOOKING EQUIPMENTINDUCTION COOKERS. Name, Date, Price (ASC), Price (DESC), Item Number.

check the keylock is not activated by holding down the key symbol for a period of 5 secs.

ENr is on rating plate on bottom of hob. The Ceramic top is easy to replace, it is held on by 3 pozi screws on each side (12 altogether) and just sits on the main electrical parts, obviously the unit should be isolated from main before you remove the top. Part can be ordered using the link
http://www.bosch-home.co.uk/store/spareparts/search

Samsung has the manual you want is the 1.75 MB PDF at the bottom of the list here: http://www.samsung.com/uk/support/model/C61R2AEE/XEU-downloads . If this second link doesn't work, follow the directions below to reach this page.

Samsung has the User's Guide for the oven on the Support tab, see http://www.samsung.com/uk/consumer/home-appliances/cooker-hobs/ceramic/C61R2AEE/XEU . The support tab is on the right. The manual for the cooking hob can be accessed from the Need More Downloads link below the Download button.

I hope this helps.

Cindy Wells

Hello,
Its most probably the clock that needs resetting,by pressing the 2 rhs buttons depending on the model.Try this and hopefully the oven will work again as long as the cooker has been connected correctly.

Hope this has helped.

Hello,
The regulations state that the proximity of the hob to the cooker would dictate the use of a copper pipe to supply the hob.

Hope this helps.

if you are installing a secondhand gas cooker then you need the manufacturers instructions you need to be a gas engineer and if the parts are no longer available you should get a new unit

Guy from Fagor said brown & blue go to black & red. White and ground together go to green & yellow. Hope he's right.

Our hob has the same problem. I would really like to know the reason for this! Try using a rubber eraser instead of your finger - this works every time with our hob. Covering Up and Down arrows with the rubber, zeros it instantly just like using both fingers. Hope this helps.

here is link to installation manual:)

http://www.fagoramerica.com/my_fagor/technical_information


Good luck and BE CAREFUL!!!