My System Mechanic requires "ilioSystemService" to

launch services.msc, and set this iolosystem service to "automatic", instead of "manual"

https://www.youtube.com/watch?v=8urHyIRYqQ4

I went through the registry and searching for 'iolo', I deleted all references. Then deleted the files under program files. This worked. I tried going to the hex keys by themselves and that did not work. But I was deleting System Mechanic and Not "PRO".

sounds like a reinstall to me

This message is alerting the driver of a suspension problem. These cars have active shock absorbers that react to road surface by electronic sensors in the shocks.This system is complex and requires the assistance of a trained mechanic. Bring your vehicle to a mechanic shop to have it checked. hope this helps

Hi sirajshah_mu,

This error message will appear if the Computer is not detecting the internal Hard Disk Drive or when the Operating System is missing.

First, please try resetting the BIOS to the default values to check if that resolves the issue. To reset the BIOS to the default values, restart the Computer, press and hold the F2 Key to access the BIOS, then, please press the F9 to load the default values and F10 to save and exit. After that, please try restarting the Computer to check if that work.

If the issue still persists, please check if the Hard Drive is listed in the BIOS main window. Also, please try disconnecting all the external Devices connected to the Computer.

If the issue is not resolved after performing the above steps, you may need to re-install the Operating System in the Computer using the Recovery Partition. It is required to have the exact model # of the Computer to provide the necessary information on Recovery. If the issue still persits, please let me know the results of the above steps and the exact model # to assist you further.

Hope this helps.

Please free to get back to me if you have any further questions or require further assistance.

Thank you for using FixYa.

Try reinstalling your system mechanic as an administrator

Right click on the setup file and select ‘run as administrator’

See if that helps

Uninstall the software.
Reboot.
Reinstall the software.
Reboot.
It should now work correctly.