I have an RCA RCR312W remote and lost my manual, request the steps needed to program my JVC tv / I have the codes, just need to know the steps to take ... Thank you

HI,

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6

Thank you