When i turn on the tv it just shows the Phillips logo and nothing else. the channels don't come on.

Hi,

Please unplug your tv for 20 second and plug back in before checking your screen. If the problem still exists, please use your remote to check that you're displaying the correct hdmi input that you've plugged into the back of your tv (ie hdmi 1, 2, 3 etc). If you're not displaying the correct input, then your tv won't show what you want to watch.

Thank you.

Hi,

it sounds like one of your tv buttons is getting stuck. And if it's the power button, then your tv would turn off. So, you would need to pull out the button after it's been used. Thank you.

Be more cost effective to replace television

Are you using cable and if so which company and box?

[email protected]

give the volume button on the telly a punch

i hav a kitten

We are having the same problem! Whats the solution!!!?!?!?!?!!!?

problem was with the FIOS Box not the phillips TV. The box appeared to be working but would not respond to channel changes and is being replaced.

HI
CHANGE YOUR TV TUNER CHIP.
ALSO PUT REMOTE CONROL CHIP AND NEW REMOTE .