Tv sound will not go off when head st is pluged in. is this normal?

it seems to be going through a diagnostics mode at start up.have you pluged in new stuff

sounds like the trans may need replaced or rebuilt. reverse and 1 st gear are on the same band. or the valve body in the trans. may be pluged up eather way. its a big job

sir may ginagawa akong tv ang trouble nya. pag on mo ng tv after mga 2 to 3 .minutes nawawala na ang sound tpos pag pinatay mo at pag plug mayron uli sounds tpos nawawala uli sound buo ang i.c sanyo st 21ys2

hi have you pluged anything in you head phone socket
have you muted your tv on the remote
if no success try you scart plug wiggling or replace
just a few things to try before any more questens

try thumping the bottom or back cover sounds like a dry joint or bad conection good luck farr64

plz ask complete qstion bcoz i cant understand ur qstion.........as u know that three cords . 1 for +ve & 2nd for -ve & one is for neutral.......try combination of different wires............& ur tv will work normally

This may be caused by a loose or broken wire in your head phone wires.

If I have the right manual you should connect the wii cable from the package to th backside of the tv. You will see four pluges. Choose with VGA you want to use, this is not important. Use the cable from the wii and plug in two of three pluges, you must match te coulors. If you have a cable box installed you will probably have scart (a big cable with a large head) connect this and it would run smooth. You can also connect the three pluges from the cable to your cable-box, use the red, wihte, and yellow pluge.

If I have the right manual you should connect the wii cable from the package to th backside of the tv. You will see four pluges. Choose with VGA you want to use, this is not important. Use the cable from the wii and plug in two of three pluges, you must match te coulors. If you have a cable box installed you will probably have scart (a big cable with a large head) connect this and it would run smooth. You can also connect the three pluges from the cable to your cable-box, use the red, wihte, and yellow pluge.