Red light blinks six times? - Sony KDF-E60A20 60 in. LCD HDTV

Voltage polarity switch.

When the light is blinking six times rapidly, this means the power volt polarity has gotten switched.

How to Troubleshoot a Goodman Furnace With Six Flashes

Videos as well

https://www.google.com/search?q=goodman+furnace+red+light+blinking+6+times

..

Hi Tim
In my opinion
No... the LED's are doing their job
Error reporting
Modern TV's are computers and try to indicate where a problem exists.
Does it need a Firmware upgrade?

Red green or orange lights are on or blinking on the TV

the kill switch is open ensure the lamp cover presses firmly on the kill switch when u close the lamp chamber door the red light will stop blinking and u can now turn the tv on

How many times does the red light flash before it pauses and then starts again? This is important info as it helps to diagnose your problem.

Most probably there is a problem in the power supply and it is going on standby protection mode. You may have to search for a service manual from open websites and look through for the error code indicated by the led blinking, to be very sure. Unfortunately I do not have one with me.

You have a bad main board most likely. You can try unpluging it for 5 minutes.

The Six blinks mean that the thermal fuse needs to be changed.

Low B error protect is what 6 blinks means on the LA-3 chassis

It looks like your power module is on the blink. Do you get any picture?

Did you get this solved yet? Six blinks usuall meand thermal fuse. I can look it up if you still need help.